F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
Bend Seizure Breakage Must engage freely in related female contacts Straighten bent pins.Replace T25 sensor if pinsare broken, eroded or seized
4. Electrical connector
well for:
R R R R R R R R R R R R R Dirt None permitted Clean with brush and stoddard solvent (Material No. CP2011) or acetone (Material No. CP1039) or ardrox 552 (Material No. CP2559) or turco ind 79 (Material No. CP2560) or mag-chem teksol (Material No. CP2566) or degreasol 99 R (Material No. CP2584) or mag-chem skysol (Material No. CP2656) or white spirit (Material No. CP2010).
5. Close-up________
Subtask 73-21-20-410-058
A. Install the T25 sensor (Ref. TASK 73-21-20-400-002):
Subtask 73-21-20-410-061
B. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Close the right thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 452AR FOR 1000EM2 462AR
F 『 EEFF : ALL E Page 60673-21-20
E E May 01/05 E E ECES E Subtask 73-21-20-440-053
F 『
E C F M E
E E
E 56-5B E
E E
C. Make the right thrust reverser serviceable (Ref. TASK 78-30-00-081-041): Subtask 73-21-20-410-059
D. Close Access
(1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040).
FOR 1000EM1
437AL, 438AR
FOR 1000EM2
447AL, 448AR
(2) Remove the access platform(s).
(3) Remove the warning notice(s).
F 『 EEFF : ALL E Page 60773-21-20
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
ALTERNATOR - CONTROL - REMOVAL/INSTALLATION
___________________________________________
TASK 73-21-30-000-001
Removal of the Control Alternator
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific closures
No specific locally manufactured guide pins
R No specific pipette No specific protective caps No specific protective covers No specific soft-jawed pliers No specific warning notice
R 856A2717 1 ADAPTER, LOCK - CORE ENGINE
R B. Consumable Materials
R -------------------------------------------------------------------------------R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R Material No. CP2442 *
R engine oil (Ref. 70-30-00)
R Material No. CP2859 *
R corrosion protective additive (Ref. 70-30-00)
F 『 EEFF : ALL E Page 40173-21-30
E E Aug 01/00 E E ECES ER C. Referenced Information
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
72-63-00-000-002 Removal of the Handcranking Drive Cover
73-21-30-991-300 Fig. 401
73-21-30-991-301 Fig. 402
73-21-30-991-302 Fig. 403
73-21-30-991-303 Fig. 404