(2) Close the thrust reverser cowl doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR
Subtask 72-54-00-440-056
B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041).
F 『 EEFF : ALL E Page 61972-54-00
E E May 01/04 E E ECES E Subtask 72-54-00-410-076
F 『
E C F M E
E E
E 56-5B E
E E
C. Close Access
(1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
(2) Remove the warning notice(s).
F 『 EEFF : ALL E Page 62072-54-00
E E May 01/04 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E TASK 72-54-00-290-006
Inspection of the Stage 4 Blades
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice No specific Torque Wrench : range 36.00 to 220.00 lbf.in
(0.40 to 2.60 m.daN) 856A1320 1 BORESCOPE KIT 856A1322 1 BORESCOPE - LIGHT SOURCE SET
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. CP2101 USA MIL-T-5544
graphite grease (Ref. 70-30-00) Material No. CP2619 *
Never Seez-Pure Nickel, Special (Ref. 70-30-00) Material No. CP8001 *
lockwire 0.032 in. (0.8 mm) dia. (Ref. 70-30-00) Material No. CP8002 *
lockwire 0.032 in (0.8 mm) dia. (Ref. 70-30-00)
F 『 EEFF : ALL E Page 62172-54-00
E E May 01/04 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
C. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
72-00-00-200-025 Over-Serviceable-Limit Extensions
72-54-00-210-004 Optional Visual Inspection of the Stage 4 Blades from the Rear of the Engine
78-30-00-081-041 Make the Thrust Reverser Serviceable after Maintenance
78-30-00-481-041 Make the Thrust Reverser Unserviceable for Maintenance
78-36-00-010-040 Opening of the Thrust Reverser Doors
78-36-00-410-040 Closing of the Thrust Reverser Doors
72-54-00-991-300 Fig. 601
72-54-00-991-301 Fig. 602
72-54-00-991-302 Fig. 603
3. Job Set-up
__________
Subtask 72-54-00-941-057
A. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2).
F 『 EEFF : ALL E Page 62272-54-00
E E May 01/04 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
Subtask 72-54-00-010-068
B. Get Access
(1) Open the fan cowl doors (Ref. TASK 71-13-00-010-040): FOR 1000EM1 437AL, 438AR FOR 1000EM2 447AL, 448AR
Subtask 72-54-00-040-057
C. Make the thrust reverser unserviceable (Ref. TASK 78-30-00-481-041).
Subtask 72-54-00-010-076
D. Open the thrust reverser doors (Ref. TASK 78-36-00-010-040):
FOR 1000EM1
451AL, 452AR
FOR 1000EM2
461AL, 462AR
4. Procedure
_________
(Ref. Fig. 601/TASK 72-54-00-991-300, 602/TASK 72-54-00-991-301, 603/TASK 72-54-00-991-302)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM ENGINE 发动机 2(82)