F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
E. Missing panel Not serviceable
F. Loose bolts Not serviceable
G. Local collapse of No limits
panel inner
surface
H. Subsurface linear No limits
impressions or
wrinkles
J. Voids Five per panel, 2 in.
(50.8 mm) apart, 0.12
in. (3 mm) Dia max,
0.012 in. (0.3 mm) max
depth
K. Defects in the
protective coating
(initial Tedlar
film, or paint)
such as:
(1) Missing No limits
(2) Defects No limits
(dents, nicks,
tears,
flaking) that
let show the
inner skin
L. Inner skin
defects, such as:
Tighten bolts
Serviceable criteriaapplied on new parts
Serviceable criteriaapplied on new parts
Remove the loose material with a sharp blade.
Remove the loose materialwith a sharp blade.
F 『 EEFF : ALL E Page 65372-23-00
E E Aug 01/05 ERE
ECES E F 『 E C F M E E E E 56-5B E F 『 E C F M E E E E 56-5B E
Fan Acoustical Panels Figure 609/TASK 72-23-00-991-311- 12 (SHEET 1)
F EEFF : E ER ECES ALL 『E 72-23-00EE E Page 654 Aug 01/05
Fan Acoustical Panels Figure 609/TASK 72-23-00-991-311- 22 (SHEET 2)
F EEFF : E ER ECES ALL 『E 72-23-00EE E Page 655 Aug 01/05
F 『
E C F M E
E E
E 56-5B E
E E
-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
(1) Superficial No limits with a total Remove the loose material defects surface area less than 4 with a sharp blade. (dents, nicks, square in. (2580 sq mm) tears, impacts per panel marks) not through the skin
(2) Defects Not serviceable Replace panel(s) (tears, (Ref. TASK 72-23-00-000-cracks, 009) and (Ref. TASK 72-23-punctures) 00-400-009). through the skin
5. Close-up
________
Subtask 72-23-00-410-103
A. Close Access
(1) Make sure that the work area is clean and clear of tool(s) and other items.
(2) Remove the access platform(s).
(3) Remove the warning notice(s).
F 『 EEFF : ALL E Page 65672-23-00
E E Aug 01/05 ERE
ECES E
F 『
E C F M E
E E
E 56-5B E
E E
TASK 72-23-00-280-006
Inspection of Mid Acoustical Panels
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
No specific access platform 1 m (3 ft. 3 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
72-21-00-000-005 Removal of the Spinner Front Cone 72-21-00-000-006 Removal of the Spinner Rear Cone 72-21-00-000-007 Removal of the Fan Rotor Blades 72-21-00-400-005 Installation of the Spinner Front Cone 72-21-00-400-006 Installation of the Spinner Rear Cone 72-21-00-400-007 Installation of the Fan Rotor Blades 72-23-00-000-025 Removal of the Mid Acoustical Panels 72-23-00-300-044 Repair of Forward, Mid and Aft Acoustical Panels when
Missing Cup 72-23-00-400-025 Installation of the Mid Acoustical Panels 72-23-00-400-044 Installation of Acoustical Panels Attachment Screw
Locking R 72-23-00-991-311 Fig. 609
F 『 EEFF : ALL E Page 65772-23-00
E E Aug 01/05 E E ECES E 3. Job Set-up
F 『
E C F M E
E E
E 56-5B E
E E
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM ENGINE 发动机 2(3)
