• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 16:58来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 TASK 72-52-00-290-001
 Borescope Inspection of the High-Pressure Turbine Blades (from the rear)
 1. Reason for the Job
__________________
 Refer to the MPD TASK: 725000-C1 This TASK is applicable for NON /P engines. Inspection of the high pressure turbine (HPT) blades from the rear is limited to the areas that can be seen with a rigid borescope, at the 5:30 and 8:30 o'clock borescope ports (S16 and S17). The borescope ports at the
 5:30 and 8:30 o'clock positions are located immediately in front of the combustion case aft flange. Inspection of the HPT blades from the front can be accomplished, if required, with a flexible borescope through the spark igniter ports (S10 and S11) of the combustion case.
R NOTE : There are 80 HPT blades installed in the rotor.
____
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific warning notice
 No specific 0.75 in. square drive socket
 No specific 2ft. long breaker bar
 No specific access platform 1 m (3 ft. 3 in.)
 No specific Torque Wrench : range 36.00 to 220.00 lbf.in

 (0.40 to 2.60 m.daN)
 856A1320 1 BORESCOPE KIT
 856A1322 1 BORESCOPE - LIGHT SOURCE SET
 856A1323 1 MONITOR, RESOLUTION BORESCOPE
 856A1488 1 MOTOR, DRIVE - CORE ENGINE ROTATION

 F 『 EEFF : ALL E Page 60172-52-00
 E E Nov 01/04 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E
 B. Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  Material No.  CP1039 

R  Material No.  CP1041 

Material No.  CP2011 
Material No.  CP2101 
R  Material No.  CP2559 

R  Material No.  CP2560 

R  Material No.  CP2566 

R  Material No.  CP2584 

Material No.  CP2619 
R  Material No.  CP2656 

Material No.  CP8001 

*
acetone (Ref. 70-30-00)
*
isopropyl alcohol (Ref. 70-30-00)
*
 stoddard solvent (Ref. 70-30-00)
USA MIL-T-5544
 graphite grease (Ref. 70-30-00)
*
ardrox 552 (Ref. 70-30-00)
*
turco ind 79 (Ref. 70-30-00)
*
mag-chem teksol (Ref. 70-30-00)
*
degreasol 99 R (Ref. 70-30-00)
*
 Never Seez-Pure Nickel, Special (Ref. 70-30-00)
*
mag-chem skysol (Ref. 70-30-00)
*
 lockwire 0.032in.(0.8mm) dia. (Ref. 70-30-00)

 C. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
71-13-00-010-040 71-13-00-410-040 72-00-00-200-025 72-42-00-290-007
72-42-00-290-041
72-52-00-290-004
72-63-00-000-002 72-63-00-400-002
F EEFF : ALL E E ECES Opening of the Fan Cowl DoorsClosing of the Fan Cowl DoorsOver-Serviceable-Limit ExtensionsBorescope Inspection of the Inner Cowl Bolts of the Combustion ChamberBorescope Inspection of the Combustion Chamber Liners and Dome AreaBorescope Inspection of the High Pressure Turbine Rotor Blade (from the front)Removal of the Handcranking Drive CoverInstallation of the Handcranking Drive Cover

E 72-52-00Page 602
E May 01/05EE -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E


78-30-00-081-041 Make the Thrust Reverser Serviceable after Maintenance 78-30-00-481-041 Make the Thrust Reverser Unserviceable for
 Maintenance 78-36-00-010-040 Opening of the Thrust Reverser Doors 78-36-00-410-040 Closing of the Thrust Reverser Doors 80-11-10-000-002 Removal of the Pneumatic Starter 80-11-10-400-002 Installation of the Pneumatic Starter NTM 72-00-00 72-52-00-991-304 Fig. 601 72-52-00-991-300 Fig. 602 72-52-00-991-301 Fig. 603 72-52-00-991-302 Fig. 604
 3. Job Set-up
__________
 Subtask 72-52-00-941-053
 A. Safety Precautions
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM ENGINE 发动机 2(58)