- The DMCs process the information received as a priority order from the SDAC 1, SDAC 2 and EIU through the FWC 1 and 2.
- Scale : The oil quantity displayed in green on the display unit of the ECAM system is graduated : from 0 to 5.50 USgal (0 - 20.81 l)
- Advisory level
F 『 EEFF : ALL E Page 179-31-00
E E Aug 01/05 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Quantity Transmitter Location
Figure 001
F 『 EEFF : ALL E Page 279-31-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Quantity Transmitter Installation
Figure 002
F 『 EEFF : ALL E Page 379-31-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Quantity Transmitter Block Diagram
Figure 003
F 『 EEFF : ALL E Page 479-31-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Tank Volume Calibration
Figure 004
F 『 EEFF : ALL E Page 579-31-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Quantity - Indicating Principle
Figure 005
F 『 EEFF : ALL E Page 679-31-00
E E Feb 01/98 E E ECES E F 『 E C F M E E E E 56-5B E
R Oil Quantity System - Schematic Figure 006
F EEFF : E E ECES ALL 『E 79-31-00EEE Page 7 May 01/05
F 『
E C F M E
E E
Oil Quantity Indicating on the ECAM System
Figure 007
F 『R EEFF : 001-049, 051-099, 101-105, 151-199, E Page 879-31-00
E E201-299, 301-302, May 01/05 E E ECES E F 『 E C F M E E E E 56-5B E
Oil Quantity Indicating on the ECAM System
Figure 007A
F 『R EEFF : 106-149, 303-399, 401-499, E Page 979-31-00
E E Aug 01/05 E E ECES E F 『 E C F M E E E E 56-5B E E E The oil quantity flashes green when the oil level quantity is lower
than 3 quarts (decreasing) and stops pulsing at 5 quarts (increasing).
F 『 EEFF : ALL E Page 1079-31-00
E E May 01/05 E E ECES E
F 『
E C F M E
E E
E 56-5B E
E E
OIL QUANTITY INDICATING SYSTEM - DEACTIVATION/REACTIVATION
__________________________________________________________
TASK 79-31-00-040-042
Check of the Oil System for Oil Quantity and Leak
1. Reason for the Job
__________________
Refer to the MMEL TASK: 79-31-01
Oil Quantity - Oil Quantity Indication
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific circuit breaker(s) safety clip(s)
No specific warning notice
B. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
R 12-13-79-610-002 Check oil level and replenish Check Pop Out Indicator
R of EMCD (Electrical Master Chip Detector)
R 12-13-79-610-002 Check oil level and replenish (Pressure Filling) 24-42-00-861-001 Energize the Ground Service Network from the External Power 24-42-00-862-001 De-energize the Ground Service Network Supplied from the External Power
3. Job Set-up
__________
Subtask 79-31-00-861-050
A. Energize the ground service network (Ref. TASK 24-42-00-861-001).
F 『 EEFF : ALL E Page 40179-31-00
E E Nov 01/03 E E ECES E E 56-5B E
F 『
E C F M E
E E
E E
Subtask 79-31-00-941-050
B. Safety Precautions
(1) On the center pedestal, on the ENG panel 115VU:
(a) Put a warning notice to tell persons not to start the engine.
(2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.
(3) On the overhead maintenance panel 50VU:
(a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.
(b) Put a warning notice to tell persons not to energize the FADEC 1(2). 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM OIL 滑油(57)
