• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-27 12:59来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific clean cloth, lintless, process cleaning absorbent wiper (cheese cloth, gauze) No specific magnifying lens, 5 to 10 times magnification, hand
 held No specific warning notice 856A1364 1 PRINT SET, BOOK - PHOTOGRAPH MCD DEBRIS
 B. Consumable Materials
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R  Material No.  CP1039 

Material No.  CP2010 
Material No.  CP2011 
Material No.  CP2442 
R  Material No.  CP2559 

R  Material No.  CP2560 

R  Material No.  CP2566 

R  Material No.  CP2584 

R  Material No.  CP2656 

EEFF :  ALL 


ECES 

* acetone (Ref. 70-30-00)* white spirit (Ref. 70-30-00)* stoddard solvent (Ref. 70-30-00)* engine oil (Ref. 70-30-00) * ardrox 552 (Ref. 70-30-00) * turco ind 79 (Ref. 70-30-00) * mag-chem teksol (Ref. 70-30-00) * degreasol 99 R (Ref. 70-30-00) *

E 79-00-00Page 609
E May 01/05EE

 F  『
 E  C F M  E
 E  E
 E  56-5B  E
 E  E


 -------------------------------------------------------------------------------
REFERENCE ------------------ DESIGNATION-------------------------------------------------------------
R  mag-chem skysol (Ref. 70-30-00)
 C. Expendable Parts
 ---------FIG.ITEM --------- --------------------------------------------------|DESIGNATION -------------------------------------------------- --------------------|IPC-CSN--------------------
10  O-ring  79-21-50 01 -090
 D. Referenced Information
 ------------------REFERENCE  -----------------------------------------DESIGNATION --------------------

-------------------------------------------------------------------------------
71-00-00-000-042 Removal of the Power Plant 71-00-00-400-042 Installation of the Power Plant 71-13-00-010-040 Opening of the Fan Cowl Doors 71-13-00-410-040 Closing of the Fan Cowl Doors 72-62-00-000-002 Removal of the Transfer Gearbox Module 72-62-00-400-002 Installation of the Transfer Gearbox Module 72-63-00-000-003 Removal of the Accessory Gearbox Assembly 72-63-00-400-003 Installation of the Accessory Gearbox Assembly 79-00-00-080-001 Removal of the Magnetic Bar from the Scavenge Screen
 Plugs (IF OPTIONALLY INSTALLED) 79-00-00-281-003 Check of FWD, AFT Sump, AGB, and TGB scavenge screens 79-00-00-480-001 Installation of a Magnetic Bar in the Scavenge Screen
 Plugs (OPTIONAL) 79-21-30-440-001 Resetting of the Visual Indicator 79-00-00-991-301 Fig. 601 79-00-00-991-304 Fig. 602 79-00-00-991-305 Fig. 603 79-00-00-991-306 Fig. 604
 3. Job Set-up
__________
 Subtask 79-00-00-941-055
 A. Safety Precautions
 (1) On the center pedestal, on the ENG panel 115VU:

 (a) Put a warning notice to tell persons not to start the engine.

 (2) Make sure that the engine 1(2) shutdown occurred not less than 5 minutes before you do this procedure.


 F 『 EEFF : ALL E Page 61079-00-00
 E E May 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E
 (3) On the overhead maintenance panel 50VU:

 (a) Make sure that the ON legend of the ENG/FADEC GND PWR/1(2) pushbutton switch is off.

 (b) Put a warning notice to tell persons not to energize the FADEC 1(2).


 Subtask 79-00-00-010-055
 B. Open the fan cowls doors: (Ref. TASK 71-13-00-010-040)
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR.

 4. Procedure
_________
 Subtask 79-00-00-281-050
 A. Inspection of the Electrical Master Chip Detector (EMCD)
 (Ref. Fig. 601/TASK 79-00-00-991-301)

 NOTE : If the EMCD is removed for inspection only, it is not necessary to
____
 disconnect the lead connector.

 (1) Remove the Electrical Master Chip Detector (EMCD) as follow:
 (a) At the same time, push and turn the EMCD plug one quarter of a turn counterclockwise.

 (b) Disengage the EMCD from its housing.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM OIL 滑油(11)