曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
lights on both RMPs come on.
TO CHANGE THE FREQUENCY :
Rotating knob........................................................................................................................TURN
Make the STBY/CRS window display the new frequency.
Outer and inner rotating knobs are used for units and decimals, respectively.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A330/A340 FLEET PRO-SUP-23 P 2/10
FCOM 19 AUG 10
Transfer key........................................................................................................................PRESS
This interchanges the ACTIVE and STBY frequency. The receiver is now tuned to the new
ACTIVE frequency.
AM key (if necessary).........................................................................................................PRESS
The green light comes on.
SEL light.....................................................................................................................CHECK OFF
If SEL light is on, select the appropriate radio systems dedicated to the onside RMP.
FAILURE CASES :
When an RMP fails :
The affected RMP no ‐ longer controls the selected receiver.
‐ The frequency displays disappear, and the green VHF or HF lights go off.
Affected RMP........................................................................................................... SWITCH OFF
One RMP can control all receivers.
• If RMP 1 is affected, tune VHF1 through RMP3.
• If RMP 2 is affected, tune VHF2 through RMP3.
• If RMP 3 is affected, tune VHF3, HF1, HF2 through RMP1 or RMP2.
• If two RMPs fail, tune all receivers through the remaining RMP.
Applicable to: ,
TUNING
The pilot should normally use his onside RMP, to tune any one of the VHF or HF desired radios.
If tuning the radio results in the SEL lights coming on, he should put them out by selecting the
appropriate radio system dedicated to his RMP.
ON/OFF switch................................................................................................................ CHECK ON
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A330/A340 FLEET PRO-SUP-23 P 3/10
FCOM 19 AUG 10
VHF or HF key....................................................................................................................... PRESS
The green light comes on.
ACTIVE and STBY/CRS windows display active and preset frequencies, respectively.
Note: The SEL light will come on both RMP if :
‐ VHF1 is selected on RMP 2 or 3 ;
‐ VHF2 is selected on RMP 1 or 3 ;
‐ VHF3, HF1, HF2 is selected on RMP 1 or 2.
TO CHANGE THE FREQUENCY :
Rotating knob........................................................................................................................TURN
Make the STBY/CRS window display the new frequency.
Outer and inner rotating knobs are used for units and decimals, respectively.
Transfer key........................................................................................................................PRESS
This interchanges the ACTIVE and STBY frequency. The receiver is now tuned to the new
ACTIVE frequency.
AM key (if necessary).........................................................................................................PRESS
The green light comes on.
SEL light.....................................................................................................................CHECK OFF
If SEL light is on, select the appropriate radio systems dedicated to the onside RMP.
FAILURE CASES :
When an RMP fails :
The affected RMP no ‐ longer controls the selected receiver.
‐ The frequency displays disappear, and the green VHF or HF lights go off.
Affected RMP........................................................................................................... SWITCH OFF
One RMP can control all receivers.
• If RMP 1 is affected, tune VHF1 through RMP3.
• If RMP 2 is affected, tune VHF2 through RMP3.
• If RMP 3 is affected, tune VHF3, HF1, HF2 through RMP1 or RMP2.
• If two RMPs fail, tune all receivers through the remaining RMP.
A330/A340 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
SUPPLEMENTARY PROCEDURES
COMMUNICATIONS
A330/A340 FLEET PRO-SUP-23 P 4/10
FCOM 19 AUG 10
Applicable to: ALL
TRANSMISSION AND RECEPTION
VHF or HF transmission key.................................................................................................. PRESS
The green bars on the selected system key light up.
The microphones and PTT command are connected to the selected system.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 11(66)
