71-00-02
Integrated Drive Generator Plumbing Installation Figure 6-3 (Sheet 4)
71-00-02
ITEM NO. PART NUMBER NOMENCLATURE UC QTY
6-3 INTEGRATED DRIVE GENERATOR PLUMBING INSTALLATION (FIGURE 6-3, SHEET 4) FLUSH IDG OIL SYSTEM PER IDG COOLING SYSTEM FLUSHING PROCEDURE. IDG COOLING SYSTEM FLUSHING PROCEDURE THE FOLLOWING PROCEDURE PROVIDES FLUSHING INSTRUCTIONS FOR THE IDG COOLING SYSTEM COMPONENTS. CAUTION: DO NOT FLUSH THE IDG COOLING SYSTEM WITH MORE THAN 250 PSIG MAXIMUM PRESSURE. USING MORE THAN THE MAXIMUM PRESSURE CAN DAMAGE THE SYSTEM. PRIOR TO CONNECTING PW OIL HOSES TO IDG OIL IN AND OIL OUT PORTS, ATTACH A 239 CUBIC FOOT NITROGEN BOTTLE TO THE OIL OUT HOSE. APPLY A PRESSURE OF 250 PSIG (MAXIMUM) TO THE HOSE. FLUSH ONLY IN THE NORMAL FLOW DIRECTION. IF ANY RESIDUAL FLUIDS FROM THE EXTERNAL COOLING SYSTEM COMES OUT OF THE IDG OIL IN LINE, DO THE FLUSHING PROCEDURE AGAIN. IF THE RESULTS ARE SATISFACTORY, PROCEED AS FOLLOWS; CONNECT PW HOSES TO OIL IN AND OIL OUT PORTS OF IDG.
71-00-02
PW2000 SERIES ENGINES
757
POWERPLANT BUILDUP MANUAL
FIGURE 6-4
MAGNETIC PLUG INSTALLATION
REF QEC TASK NO.: 6
REF DWG: 332N3470 NOTE: THIS FIGURE NOT USED
71-00-02
P/P BUILDUP FIGURE 6-4 Page 1 Jan 15/2010
PW2000 SERIES ENGINES
757
POWERPLANT BUILDUP MANUAL
THIS FIGURE NOT USED
Figure 6-4 (Sheet 1)
71-00-02
P/P BUILDUP FIGURE 6-4 Page 2 Jan 15/2011
ITEM NO. PART NUMBER NOMENCLATURE UC QTY
6-4 THIS FIGURE NOT USED (FIGURE 6-4, SHEET 1) THIS SHEET NOT USED
71-00-02
PW2000 SERIES ENGINES
757
POWERPLANT BUILDUP MANUAL
FIGURE 6-5
OIL MARKER INSTALLATION
REF QEC TASK NO.: 6
REF DWG: 310N3072
71-00-02
P/P BUILDUP FIGURE 6-5 Page 1 May 05/2009
PW2000 SERIES ENGINES
757
POWERPLANT BUILDUP MANUAL
Oil Marker Installation
Figure 6-5 (Sheet 1)
71-00-02
P/P BUILDUP FIGURE 6-5 Page 2 May 05/2009
ITEM NO. PART NUMBER NOMENCLATURE UC QTY
6-5 OIL MARKER INSTALLATION (FIGURE 6-5, SHEET 1) INSTALL MARKERS (5) ON OIL TANK, STARTER AND BRACKET SUPPORTING IDG PRESSURE FILL FITTINGS. BRUSH COAT EDGES OF MARKERS WITH EDGE SEALANT (REF 71-00-00, INTRODUCTION).
5 BAC27DAP31 . MARKER (BP/EXXON TURBO OIL 2380) 3
5 BAC27TPP0024 . MARKER (ESSO OR EXXON TURBO OIL 2380) (REPLACED BY BAC27DAP31)*[1] LTD -
5 BAC27EPP-4 . MARKER (MOBIL JET OIL II) OPT -
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 动力装置安装手册 Powerplant Buildup Manual(71)
