757 动力装置安装手册 Powerplant Buildup Manual(65)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

35  AE705777-52  . HOSE ASSY (V00624) (BOEING S270T230-55)  VEN  -
35  S270T230-55  . HOSE ASSY  1 
36  22610-013  . . PACKING (V00624)  REF  -
36  NAS1611-013  . . PACKING (OPT) INSTALL HOSE ASSY (40) BETWEEN SUPPLY PORT ON HYDRAULIC PUMP AND UNION (10). TIGHTEN CONNECTION TO 400-500 LB-IN AT HYDRAULIC PUMP AND 1520-1680 LB-IN AT UNION (10).  REF  -
40  AE705777-83  . HOSE ASSY (V00624) (BOEING S270T230-81)  VEN  -
40  S270T230-81  . HOSE ASSY  1 
41  22610-024  . . PACKING (V00624)  REF  -
41  NAS1611-024  . . PACKING (OPT) INSTALL HOSE ASSY (45) BETWEEN PRESSURE PORT ON HYDRAULIC PUMP AND UNION (5). TIGHTEN HOSE ASSY (45) TO 500-700 LB-IN AT HYDRAULIC PUMP. TIGHTEN HOSE ASSY (45) TO 1120-1280 LB-IN AT UNION (5), THEN BACKOFF TO RELAX THE TORQUE, AND RETIGHTEN TO 1800 LB-IN.  REF  -
45  108062-82  . HOSE ASSY (V78570) (BOEING S270T230-82)  VEN  -
45  S270T230-82  . HOSE ASSY  1 
45  108062-56  . HOSE ASSY (V78570) (BOEING S270T230-56)  VEN  -
45  S270T230-56  . HOSE ASSY  OPT  -
46  NAS1611-020  . . PACKING  REF  -

71-00-02
 

Hydraulic and Fuel Plumbing Installation
Figure 5-2 (Sheet 3)

71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
5-2  HYDRAULIC AND FUEL PLUMBING INSTALLATION (FIGURE 5-2, SHEET 3) SECURE HOSE ASSY (35) TO ENGINE FLANGE USING ITEMS (50 THRU 59). 
50  BACC10GU108  . CLAMP  1 
53  BACS12HN3U12  . SCREW  1 
56  NAS1149C0332R  . WASHER  1 
59  BACN10YR3C  . NUT POSITION CLAMP (65) ON HOSE ASSYS (40). SECURE CLAMP (65) TO ENGINE BRACKET USING ITEMS (71 THRU 77).  1 
65  BACC10GU117  . CLAMP  1 
68  BACS18AF3  . SPACER  AR 
71  BACS12HN3U10  . SCREW  1 
74  NAS1149C0332R  . WASHER  1 
77  BACN10YR3C  . NUT  1 

71-00-02
 

Hydraulic and Fuel Plumbing Installation
Figure 5-2 (Sheet 4)

71-00-02
 

ITEM NO.  PART NUMBER  NOMENCLATURE  UC  QTY 
5-2  HYDRAULIC AND FUEL PLUMBING INSTALLATION (FIGURE 5-2, SHEET 4) WITH SPACER: POSITION CLAMP (62) ON HOSE ASSY (45). POSITION SPACER (69) TO LOWER TWO HOLES OF ENGINE BRACKET AND SECURE TO LOWER HOLE WITH ITEMS (70, 74, 77). MEASURE GAP BETWEEN ENGINE BRACKET AND CLAMP (62). ADD SPACERS (68) UNTIL THE GAP IS 0.020 INCH OR LESS (3 SPACERS MAX). SECURE CLAMPS (62) TO ENGINE BRACKET USING ITEMS (72 THRU 77). 
62  BACC10GU115  . CLAMP  1 
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 动力装置安装手册 Powerplant Buildup Manual(65)