TASK 32-32-19-002-001
2. Remove the Hydraulic Fuse from the Truck Positioner Shuttle Valve on the Main_____________________________________________________________________________ Landing Gear (Fig. 201)____________
NOTE:____There are two options to remove the fuse. Remove the fuse from the shuttle valve module (Option 1), or remove the fuse with the shuttle valve module as a unit (Option 2).
A. References
(1)
AMM 29-11-00/201, Main (Left, Right, and Center) Hydraulic Systems
(2)
AMM 32-00-15/201, Landing Gear Door Locks
(3)
AMM 32-00-20/201, Landing Gear Downlocks
(4)
AMM 32-32-17/401, Main Gear Truck Positioner Shuttle Valve
B.
Access
(1)
Location Zones
551 Wing Trailing Edge (Left)
651 Wing Trailing Edge (Right)
C.
Prepare for Removal
S 212-002
(1) Make sure the downlocks are installed on the nose and main landing gear (AMM 32-00-20/201).
32-32-19
ALL ú ú 12 Page 201 ú May 28/01
A
757
MAINTENANCE MANUAL
SPAR REAR WING SEE A
TRUNNION SUPPORT STRUCTURE
FOR THE MAIN LANDING GEAR
SEE B
TRUCK POSITIONER
SHUTTLE VALVE
FWD MODULE
SEE C
STABILIZING
LINK
LEFT MAIN LANDING GEAR
A 1
REAR WING SPAR
FWD
TRUNNION SUPPORT STRUCTURE FOR THE MAIN LANDING GEAR B
1 FOR THE LEFT MAIN LANDING GEAR POSITIONER SHUTTLE VALVE MODULE FUSE INSTALLED ONLY IN THE TRUCK Figure 201 (Sheet 1) Truck Positioner Fuse Installation for the Main Landing Gear
32-32-19
ALL ú ú 11 Page 202 ú Mar 20/90
A
757
MAINTENANCE MANUAL
BOLTS
STABILIZING LINK
HYDRAULIC HYDRAULIC LINESFLOW FUSE (3 LOCATIONS)SEE D
TRUCK POSITIONER
SHUTTLE VALVE
MODULE
ELECTRICAL
CONNECTOR
FWD
TRUCK POSITIONER SHUTTLE VALVE MODULE
C1
RING
PACKING
HYDRAULIC
FUSE
RING
PACKING
REDUCER
O-RING
TRUCK POSITIONER
SHUTTLE VALVE
MODULE
FWD
HYDRAULIC FLOW FUSE
D
Truck Positioner Fuse Installation for the Main Landing Gear Figure 201 (Sheet 2)
32-32-19
ALL ú ú 02 Page 203 ú Mar 20/90
A
757
MAINTENANCE MANUAL
RIGHT WHEEL WELL
SEE A
WHEEL WELL CEILING
DOOR OPERATED
SEQUENCE VALVE
(REF)
FWD
WHEEL WELL
KEEL BEAM
EXTENSION
HYDRAULIC
FLOW FUSE
RETRACTION
HYDRAULIC
FLOW FUSE
CLAMP
BOLT
WASHER
(4 LOCATIONS)
MAIN LANDING GEAR
DOOR ACTUATOR
(REF)
RIGHT WHEEL WELL
A
Main Landing Gear Extension/Retraction Hydraulic Flow Fuse Installation
(Right Wheel Well)
Figure 202 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.
GUN 001-010, 101-102 ú 32-32-19
ú ú 10 Page 204 ú Jun 20/91
A
757
MAINTENANCE MANUAL
RIGHT WHEEL WELL EXTENSION HYDRAULIC
SEE A FLOW FUSE
BOLT
CLAMP
WASHER
(4 LOCATIONS)
RETRACTION HYDRAULIC FLOW FUSE
WHEEL WELL CEILING
FWD
WHEEL WELL KEEL BEAM
RIGHT WHEEL WELL
A
Main Landing Gear Extension/Retraction Hydraulic Flow Fuse Installation
(Right Wheel Well)
Figure 202 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. GUN 103-999 ú
32-32-19
ú ú 10 Page 205 ú Jun 20/91
A
757
MAINTENANCE MANUAL
S 492-003
WARNING:_______OBEY THE INSTALLATION PROCEDURE FOR THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY. THE MOVEMENT OF THE DOORS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 起落架 CHAPTER 32 - LANDING GEAR 2(69)