32-32-00
ALL ú ú 02 Page 2 ú Mar 20/90
A
757 MAINTENANCE MANUAL
SEE A
DOOR ACTUATOR
MAIN
LANDING
GEAR
DOOR
CENTER HINGE SUPPORT BEAM
FWD
A
Door Actuator
Figure 2
32-32-00
ALL ú ú 01 Page 3 ú Mar 20/90
A
757
MAINTENANCE MANUAL
SEE A DOWNLOCK ACTUATOR
UPPER DOWNLOCK LINK
FWD
A
Downlock Actuator
Figure 3
32-32-00
ALL ú ú 01 Page 4 ú Mar 20/88
A
757
MAINTENANCE MANUAL
(1)
The door-operated gear sequence valve is a three-position valve. The valve controls the flow of hydraulic fluid to the downlock, uplock, and retract actuators. This valve controls the sequence of landing gear movement in relation to door position for the landing gear. The valve is connected to and operated by the door actuator. The valve is installed above the door actuator on the keel beam in the wheel well for the main landing gear.
F.
Downlock-Operated Door Sequence Valve (Fig. 6)
_____________________________________
(1) The downlock-operated door sequence valve is a two-position valve. The valve controls the flow of hydraulic fluid to the door actuator. This valve is hydraulically connected to the uplock-operated sequence valve. The valve's primary function is to supply hydraulic pressure to the door actuator to close the door when the main landing gear is down and locked. The valve is installed on the jury brace, which is attached to the rear wing spar, just outboard of the upper downlock link. Valve position is operated by a target on the upper downlock link which engages a roller on the valve when the landing gear is down and locked.
UPLOCK-OPERATED
SEQUENCE VALVE
UPLOCK ACTUATOR
SEE A
UPLOCK ASSEMBLY INBD A
Uplock Mechanism Figure 4
32-32-00
ALL ú ú 02 Page 5 ú Mar 20/90
A
757 MAINTENANCE MANUAL
SEE A
DOOR-OPERATED GEAR SEQUENCE VALVE
DOOR
ACTUATOR
FWD A
Door-Operated Gear Sequence Valve Figure 5
32-32-00
ALL ú ú 02 Page 6 ú Mar 20/88
A
757
MAINTENANCE MANUAL
SEE A
FWD
SEQUENCE VALVE TARGET
DOWNLOCK-OPERATED
DOOR SEQUENCE VALVE UPPER DOWNLOCK LINK
A
Downlock-Operated Door Sequence ValveFigure 6
32-32-00
ALL ú ú 01 Page 7 ú Mar 20/88
A
757
MAINTENANCE MANUAL
G. Uplock-Operated Sequence Valve (Fig. 4)
______________________________
(1)
The uplock-operated sequence valve is a two-position valve. It controls the flow of hydraulic fluid to the door actuator. This valve is hydraulically connected to the downlock-operated door sequence valve. Its primary function is to supply hydraulic pressure to the door actuator to open or close the door when the main landing gear is up and locked. A restrictor check valve installed in the hydraulic fitting in the line that connects this valve and the downlock-operated door sequence valve decreases the speed at which the door closes for safety. The uplock-operated sequence valve is installed on the uplock assembly on the outboard fairing of the wheel well for the main landing gear. The valve is connected, but not directly, to the uplock actuator and movement of the uplock actuator operates the valve position.
H.
Truck Positioner Actuator (Fig. 7)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 起落架 CHAPTER 32 - LANDING GEAR 2(41)