6.  
Verification of the changes made is the same as before.  As above, type “CFG” to restart the Configuration sub-mode.  At the CFG > prompt, type “CMR” <ENTER>.  Each Category and its associated ID is read from the Configuration Module and listed on the display.  Alternately, when not in the Configuration sub-mode, the command “PS” (Present Status) will display EGPWC and configuration data.
7.  
Configuration Module reprogramming is complete.
An example CUW command/data string, its definition, and the corresponding CWR list is provided below. CUW command/data string: 
CFG > CUW 0/15 2 3 2 0 0 3 95 1 0 0 0 0 0 0 0/ 
Above Configuration defined:  
Category 1 Aircraft/Mode Type:  2  
Category 2 Air Data Source:  3  
Category 3 Position Source:  2  
Category 4 Altitude Callouts Menu:  0 (All callouts)  
Category 5 Audio Menu:  0 (Basic menu)  
Category 6 Display Configuration:  3  
Category 7 Select Group #1 Options:  95  
Steep Approach Enabled:  True  
TA&D Alternate Pop-Up:  False (Pop-Up on Caution or Warning)  
Peaks Mode Enable:  True  
Obstacle Awareness Enabled:  True  
Bank Angle Enable:  True  
Flap Reversal:  True  
GPS Altitude Reference:  MSL (required for internal GPS source, Cat 3 ID 2)  
Category 8 Radio Altitude Input Select:  1  
Category 9 Navigation Input Select:  0  
Category 10 Attitude Input Select:  0  
Category 11 Heading Input Select:  0  
Category 12 Windshear Select type:  0  
Category 13 Discrete I/O Type Select:  0  
Category 14 Audio output Level Select:  0 (Equiv. to MK VI GPWS output level)  
Category 15 Undefined  0  
CWR list: (based on above configuration)  
CFG > CMR  
CONFIGURATION MODULE:  
Format Version:0  
Category 1 ID: 2  
Category 2 ID: 3  
Category 3 ID: 2  
Category 4 ID: 0  
Category 5 ID: 0  
Category 6 ID: 3  
Category 7 ID: 95  
Category 8 ID: 1  
Category 9 ID: 0  
Category 10 ID: 0  
Category 11 ID: 0  
Category 12 ID: 0  
Category 13 ID: 0  
Category 14 ID: 0  
Category 15 ID: 0  
CRC: 1565805624 
EGPWS LINE MAINTENANCE MANUAL
5 SERVICING 
5.1 GENERAL 
The EGPWS does not require any servicing.
6  REMOVAL/INSTALLATION 
6.1 EGPWC 
6.1.1 REMOVAL 
1.  
Remove power to the EGPWC.
2. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:增强型近地警告系统 Enhanced Ground Proximity Warning 航线维护手册 Systems Line Maintenance Manual(46)