• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-10-12 14:19来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Level 6 Audio readout
Disabled => “Terrain Off”
Terrain Awareness & TCF Inhibit
Normal => “Terrain On”

3.8.23 SIMULATOR REPOSITION (MK V AND MK VII ONLY)
Type: Switch for activating Simulator Reposition Signal Status: Reposition or Normal If the Simulator Reposition program pin option is activated, then this discrete can be used to ‘preset’ the EGPWS to
match simulator initial conditions.
Level 6 Audio readout
Reposition => “Simulator Reposition On”
Simulator Reposition Discrete
Normal => “Simulator Reposition Off”

3.8.24 WEATHER RADAR ON/OFF
Type: WXR On/Off switch input Signal Status: Radar turned on or off
Level 6  Audio readout 
WXR #1 On Discrete  On => Off =>  “Weather On” “Weather Off” 
WXR #2 On Discrete  On => Off =>  “Weather 2 On” “Weather 2 Off” 


3.8.25 LOCALIZER VALIDITY DISCRETES (MK V AND MK VII ONLY)
Two Localizer validity discretes may be used by EGPWS, one for each possible ARINC 547 Localizer Receiver input.
Type: Validity from ARINC 547 Localizer receiver.
Signal Status: Valid or Invalid

Level 6  Audio readout 
Localizer Validity Discrete #1  Valid => Invalid =>  “Localizer 1 Valid” “Localizer 1 Invalid” 
Localizer Validity Discrete #2  Valid => Invalid =>  “Localizer 2 Valid” “Localizer 2 Invalid” 

 

3.8.26 ATTITUDE VALIDITY DISCRETES
Two Attitude validity discretes may be used by EGPWS, one for each possible Attitude sensor.
Type: Validity from Attitude sensor.
Signal Status: Valid or Invalid

Level 6  Audio readout 
Attitude Validity Discrete #1  Valid => Invalid =>  “Attitude 1 Valid” “Attitude 1 Invalid” 
Attitude Validity Discrete #2  Valid => Invalid =>  “Attitude 2 Valid” “Attitude 2 Invalid” 


3.8.27 AIRSPEED VALIDITY DISCRETE
Airspeed validity discrete may be used by EGPWS for the Airspeed sensor.
Type: Validity from Airspeed sensor.
Signal Status: Valid or Invalid

Level 6 Audio readout Valid => “Airspeed  Valid”Airspeed  Validity Discrete Invalid => “Airspeed Invalid”

3.8.28 BAROMETRIC ALTITUDE RATE VALIDITY DISCRETES
Two Barometric Altitude Rate validity discretes may be used by EGPWS, one for each possible barometric rate
sensor.
Type: Validity from barometric rate sensor.
Signal Status: Valid or Invalid

Level  6 Audio readout 
Barometric Altitude Rate Validity Discrete #1  Valid => Invalid =>  “Altitude Rate1 Valid” “Altitude Rate1 Invalid” 
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:增强型近地警告系统 Enhanced Ground Proximity Warning 航线维护手册 Systems Line Maintenance Manual(38)