EC 1056/2008 EC 1056/2008EU 127/2010EC 1056/2008 EC 1056/2008 EC 1056/2008
M.A.703 Extent of approval
(a)
The approval is indicated on a certificate included in Appendix VI issued by the com-petent authority.
(b)
Notwithstanding paragraph (a), for commercial air transport, the approval shall be part of the air operator certificate issued by the competent authority, for the aircraft operated.
(c)
The scope of work deemed to constitute the approval shall be specified in the con-tinuing airworthiness management exposition in accordance with point M.A.704.
M.A.704 Continuing airworthiness management exposition
(a)
The continuing airworthiness management organisation shall provide a continuing airworthiness management exposition containing the following information:
1.
a statement signed by the accountable manager to confirm that the organisation will work in accordance with this Part and the exposition at all times, and;
2.
the organisation’s scope of work, and;
3.
the title(s) and name(s) of person(s) referred to in points M.A.706(a), M.A.706(c), M.A.706(d) and M.A.706(i);
4.
an organisation chart showing associated chains of responsibility between all the person(s) referred to in points M.A.706(a), M.A.706(c), M.A.706(d) and M.A.706(i);
5.
a list of the airworthiness staff referred to in point M.A.707, specifying, where applicable, the staff authorised to issue permits to fly in accordance with point M.A.711(c);
6.
a general description and location of the facilities, and;
7.
procedures specifying how the continuing airworthiness management organisa-tion ensures compliance with this Part, and;
8.
the continuing airworthiness management exposition amendment procedures.
9.
the list of approved aircraft maintenance programmes, or, for aircraft not involved in commercial air transport, the list of “generic” and “baseline” mainte-nance programmes.
(b)
The continuing airworthiness management exposition and its amendments shall be approved by the competent authority.
(c)
Notwithstanding paragraph (b), minor amendments to the exposition may be approved indirectly through an indirect approval procedure. The indirect approval procedure shall define the minor amendment eligible, be established by the con-tinuing airworthiness management organisation as part of the exposition and be approved by the competent authority responsible for that continuing airworthiness management organisation.
Part-M AMC M.A.704 Continuing airworthiness management exposition
AMC M.A.704 Continuing airworthiness management exposition (*)
1.
The purpose of the continuing airworthiness management exposition is to set forth the procedures, means and methods of the M.A. Subpart G organisation. Compliance with its contents will assure compliance with Part-M requirements.
2.
A continuing airworthiness management exposition should comprise: Part 0 General organisation Part 1 Continuing airworthiness procedures Part 2 Quality system or organisational review (as applicable) Part 3 Contracted maintenance (for operators) – management of maintenance
(liaison with maintenance organisations in the case of non commercial air transport) Part 4 Airworthiness review procedures (if applicable)
3.
Where a M.A. Subpart G organisation is also approved to another Part, the exposition or manual required by the other Part may form the basis of the continuing airwor-thiness management exposition in a combined document. Example for a combined Part-145 and M.A. Subpart G organisation:
Part-145 Exposition (see equivalent paragraphs in AMC 145.A.70 (a))
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：CONTINUING AIRWORTHINESS REQUIREMENTS – PART M 1(50)
