*
Alternate function parameters
*
Crew alertness monitor
*
Request uplink imbedded message identifier (IMI) table
*
Datalink option codes
*
Downlink trigger parameters.
You can modify any of the default values for these functions. In addition, you can create tables or values for these functions:
*
Downlink address table
*
Airline ground address table.
There are no default values for these tables.
Performance, Guidance and Takeoff Data Alternate Function Parameters
Parameter Default Value Valid Range
All Eng Accel ht 1000 feet 400-9999 feet
Eng out accel ht 1000 feet 400-9999 feet
Speed restriction none 100-400 kts
Speed transition 250 kts/10000 ft Spd 100-400 kts Alt 0-40000 ft
Maneuver margin 1.2 FAA 1.3 CAA/JAR 1.2-1.3 FAA 1.3-CAA/JAR
Rate of climb margin for climb 100 ft/min 0-500 ft/min
Rate of climb margin for cruise 100 ft/min 0-500 ft/min
Default thrust rating in cruise Max cruise thrust Max climb or max cruise thrust
Minimum cruise time 1 minute 1-20 minutes
Thrust reduction height/ flap setting 1000 feet 400-9999 feet
Fuel freeze/min operating temp -37C -99C to -1C
Takeoff Derate 1 10% 0-30%
Takeoff Derate 2 20% 0-30%
Company speed Defined in NDB 1-400 kts CAS (.1 to .99 MACH)
Company speed thrust rating Max climb thrust Max climb, Max cruise, Max con
The table shows the default values and the valid range for the The table shows the default values and the valid range for the performance, guidance and takeoff data.
alternate function parameters.
EFFECTIVITY BEJ ALL 34-61-00
Page 98.95
D633W101-BEJ May 05/2003
BOEING PROPRIETARY -Copyright # -Unpublished Work -See title page for details.
FMCS -AIRLINE MODIFIABLE INFORMATION
Parameter Default Value Valid Range
Altitude FMCF computed 1500-40000 ft
Min runway length 0 feet 0-15000 ft
Speed mode ECON ECON, CAS/MACH, LRC, EOLRC, COSPD
Speed value None 1-400 kts CAS .1 -.99 MACH
Crew Alertness Monitor Parameters
The table shows the default values and the valid range for the crew alertness monitor parameters.
Parameter Default Value Valid Range
Cruise advisory timer 15 min 15-60 min
Cruise caution timer 20 min 15-75 min
Cruise warning timer 25 min 15-75 min
Descent advisory timer 5 min 5-60 min
Descent caution timer 6 min 5-75 min
Descent warning timer 7 min 5-75 min
Also, the default settings for the crew caution, and advisory annunciations are enable any or all of these annunciations. alertness warning, disabled. You can
Request Uplink IMI Table
The table shows the default IMI values and the associated imbedded element identifier (IEI) values for uplink requests.
IMI Description IMI Associated IEI
Flight Plan FPN RP, FN
Load information LDI RR
Performance initialization PER PR
Position POS POS
Progress (ETA) report PRG DT
Datalink Option Codes
You set a bit in a data word to a logic 1 or a logic 0 to control the datalink option codes. Bits 1-10 are for functions that show on a CDU display. The default value for these functions is set to a logic 0 which causes the function to show on the appropriate display. A logic 1 blanks the function. These are the functions:
*
Bit 1 -Flight plan data request inhibit
*
Bit 2 -Performance Initialize data request inhibit
*
Bit 3 -Takeoff data request inhibit
*
Bit 4 -Enroute wind data request inhibit
*
Bit 5 -Descent forecast data request inhibit
*
Bit 6 -Company preferred alternate request inhibit
*
Bit 7 -Alternate flight list data request inhibit
*
Bit 8 -Alternate weather data request inhibit
*
Bit 9 -Flight plan data report inhibit
*
Bit 10 -Position report inhibit.
Bits 11 through 23 control data that may be added to message content or functions that will be added. These items have a default value of logic 0 which excludes the functionality:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 导航 Navigation 2(69)
