*
Push 3L, TO 1
*
Push 4L, TO 2.
<SEL> shows next to the selected takeoff thrust derate.
To make a climb thrust selection, do one of these:
*
Push 2R, CLB>
*
Push 3R, CLB 1>
*
Push 4R, CLB 2>.
<ARM> shows next to the selected climb thrust derate.
EFFECTIVITY BEJ ALL 34-61-00
Page 89
D633W101-BEJ May 05/2003
FMCS -THRUST LIM PAGE
Page Selections
Push 6L, <INDEX to show the INIT/REF INDEX page.
Push 6R, TAKEOFF>, to show the TAKEOFF REF page.
Training Information Point
Refer to the flight operations manual for more information about this page.
EFFECTIVITY BEJ ALL 34-61-00
Page 90
D633W101-BEJ May 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
FMCS -THRUST LIM PAGE
EFFECTIVITY BEJ ALL 34-61-00
Page 91
D633W101-BEJ May 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
THIS PAGE IS INTENTIONALLY LEFT BLANK
34-61-00
Page 92 D633W101-BEJ May 05/2003
FMCS -TAKEOFF REF PAGE
Purpose
The takeoff reference (TAKEOFF REF) page shows preflight FMCF initialization status. This page permits manual entries and shows FMCF takeoff calculation data.
Page Access
To get access to the TAKEOFF REF page, push the INIT/REF mode key when preflight status is complete. Also, to get access to the TAKEOFF REF page, push the TAKEOFF line select key from one of these CDU pages:
*
INIT/REF INDEX page
*
PERF INIT page
*
THRUST LIM page
*
RTE page.
Color
All text on this page is white.
Data Fields
These data fields show for the TAKEOFF REF page 1/2:
*
1L -takeoff flaps selection
*
2L -assumed temperature for the takeoff thrust derate calculations
*
3L -center of gravity (CG) and stabilizer trim takeoff setting
*
4L -takeoff runway and takeoff distance from the runway threshold
EFFECTIVITY
BEJ ALL
*
5L -prompt to request for a takeoff data uplink
*
1R -decision speed (V1)
*
2R -rotate speed (VR)
*
3R -engine out climb speed (V2)
*
4R -takeoff gross weight
*
5R -status of the reference speeds display. When OFF shows in green, the reference speeds do not show. When ON shows in green, the reference speeds show in the center column next to the V speeds.
These data fields show for the TAKEOFF REF page 2/2:
*
3L -wind direction and wind speed
*
4L -FMC calculated headwind/tailwind and crosswind
components for the takeoff runway and surface wind
*
5L -runway slope
*
1R -engine out acceleration height
*
2R -acceleration height
*
3R -thrust reduction altitude or flaps setting
*
4R -uplinked takeoff gross weight
*
5R -outside air temperature.
Page Selections
Push 6L, <INDEX to show the INIT/REF INDEX page.
Push 6R on page 1/2 to show one of these pages:
*
POS INIT> -This shows when on the ground and ADIRU initialization is not complete.
*
ROUTE> -This shows when the ADIRU POS INIT page is complete and the RTE page is not complete.
34-61-00
Page 93 D633W101-BEJ May 05/2003
FMCS -TAKEOFF REF PAGE
*
PERF INIT> -This shows when the route page is complete and the PERF INIT page is not complete.
*
THRUST LIM> -This shows if none of the other conditions exist.
Training Information Point
Refer to the flight operations manual for more information about the TAKEOFF REF page.
EFFECTIVITY BEJ ALL 34-61-00
Page 94
D633W101-BEJ May 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
FMCS -TAKEOFF REF PAGE
EFFECTIVITY BEJ ALL 34-61-00
Page 95
D633W101-BEJ May 05/2003
FMCS -APPROACH REF PAGE
Purpose
The approach reference (APPROACH REF) page shows approach data.
Page Access
To get access to the APPROACH REF page, do one of these steps:
*
Select APPROACH from the INIT/REF INDEX page
*
Push the INIT/REF mode key during flight when the climb mode is not active.
Color
All text is white or green.
Data Fields
The APPROACH REF page shows these data fields:
*
1L -gross weight
*
3L -landing reference as QFE or QNH. QFE is active when it shows in large green font. QNH is active when it shows in large green font. Only one reference can be active at one time
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 导航 Navigation 2(50)
