*
Enter into 1L.
The VOR frequency range does not include the frequencies between 108.0 to 111.95 MHz and frequencies that contain odd tenths. All frequencies from 112 to 117.95 MHz are included.
Line 1L shows dashes with a delete entry.
Line 2L shows dashes with a delete entry.
To enter a VOR course at 2L or 2R when dashes show, do this:
*
Type a number between 000 to 360 into the scratchpad
*
Enter into 2L.
Dashes show in the VOR course data field and M shows next to the VOR frequency. An entry of 360 shows as 000.
34-61-00
Page 98.53 D633W101-BEJ May 05/2003
FMCS -ALTN NAV RADIO PAGE
A delete at line 2L with a course present blanks the course data field and dashes show.
Do this to enter an ADF frequency at 3L:
*
Type a frequency between 190.0 and 1750 kHz into the scratchpad
*
Enter into 3L.
Do this to enter an A (ANT) or B (BFO) ADF tune mode at 3L:
*
Type the letter A or B into the scratchpad
*
Enter into 3L.
Do this to delete the A or B from an ADF entry at line 3L:
*
Push the DEL key. DELETE shows in the scratchpad
*
Enter into line 3L.
You can not use the DELETE key to delete an ADF frequency.
Do this to enter an ILS frequency or course at 4L:
*
Type an ILS frequency between 108.10 to 111.95 (odd tenths)
*
Type a course between 000 to 360 with a leading slash
*
Enter into 4L.
A course entry of 360 shows as 000 in the ILS course field at 4L.
Do this to delete an ILS entry at 4L:
*
Push the DEL key
*
Enter into 4L. Line 4L shows dashes with a delete entry. Line 6L or 6R entries are valid 1L, 2L, 3L, and 4L frequency or
course formats.
Line 6L or 6R shows dashes with a delete entry.
EFFECTIVITY BEJ ALL 34-61-00
Page 98.54
D633W101-BEJ May 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
FMCS -ALTN NAV RADIO PAGE
EFFECTIVITY BEJ ALL 34-61-00
Page 98.55
D633W101-BEJ May 05/2003
FMCS -COMM PAGE
Purpose
The FMC communication (COMM) page does these functions:
*
Supplies access to FMC CDU pages that have data link information
*
Shows which FMC CDU pages have pending uplink information
*
Shows the data link status.
Page Access
To see the FMC COMM page, select the FMC COMM mode key.
Color
All text on this page is white.
Information
Line 6R shows the data link status, the possible indications are:
*
READY
*
NO COMM
*
VOICE
*
FAIL.
Selections
Push line 1L to access RTE 1 page. If RTE 2 shows on line 1L then you will access the RTE 2 page. The word UPLINK shows in small font above line 1L when there is an uplink pending.
Push line 2L to access the ALTN page. The word UPLINK shows in small font above line 2L when there is an uplink pending.
Push line 3L to access the PERF INIT page. The word UPLINK shows in small font above line 3L when there is an uplink pending.
Push line 4L to access the TAKEOFF REF page 1/2. The word UPLINK shows in small font above line 4L when there is an uplink pending.
Push line 5L to access the ACT RTE X DATA or MOD RTE X DATA. The word UPLINK shows in small font above line 5L when there is an uplink pending.
Push line 6L to access the DESCENT FORECAST page. The word UPLINK shows in small font above line 6L when there is an uplink pending.
Push line 1R to access the POS REPORT page.
Push line 3R to access the automatic surveillance/air traffic control (ADS/ATC) status page.
Training Information Point
Refer to the flight operations manual for more information related to this page.
EFFECTIVITY BEJ ALL 34-61-00
Page 98.56
D633W101-BEJ May 05/2003
777 AIRCRAFT MAINTENANCE MANUAL
FMCS -COMM PAGE
EFFECTIVITY BEJ ALL 34-61-00
Page 98.57
D633W101-BEJ May 05/2003
FMCS -FMCF FUNCTIONAL DESCRIPTION -INTRODUCTION
General
There are two FMCFs, one in the CPM/ACMF in the left AIMS cabinet and one in the CPM/Basic in the right AIMS cabinet.
The FMCFs use digital and analog inputs from external sensors and components, flight deck controls, internal AIMS cabinet interfaces, and cross cabinet AIMS interfaces.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 导航 Navigation 2(60)
