(Activation for the BITE Test) R AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning) ASM 27-92/14
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the side stick assembly (activation for the BITE test) (Ref. AMM TASK 27-96-00-710-020).
(2) Do the BITE test of the EFCS (Ground Scanning) (Ref. AMM TASK 27-96-00-740-001).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message:
ELAC2 OR INPUT OF F/O PITCH CTL SSTU 4CE4
- replace the ELAC-2 (2CE2), (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
(1) If the fault continues:
- replace the SSTU-PITCH CTL, F/O (4CE4), (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
(2) If the fault continues:
- do a check and repair the wiring from the ELAC 2 (2CE2) to the SSTU (4CE4) (Ref. ASM 27-92/14).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 215
Aug 01/99 CES
B. Do the operational test and the BITE test given in Para. 3.
Failure of the CAPT Roll Control SSTU
1. Possible Causes
_______________
- SSTU-ROLL CTL, CAPT (4CE1)
- control rods, bellcranks and input levers of the transducer unit
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R AMM 27-92-41-000-001 Removal of the Side Stick Assembly 19VU (18VU) AMM 27-92-41-000-002 Removal of the Transducer Units (4CE1,4CE2,4CE3,4CE4) R AMM 27-92-41-400-001 Installation of the Side Stick Assembly 19VU (18VU) AMM 27-92-41-400-002 Installation of the Transducer Units (4CE1,4CE2,4CE3,4CE4) AMM 27-96-00-710-020 Operational Test of the Side Stick Assembly (Activation for the BITE Test) AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the side stick assembly (activation for the BITE test) (Ref. AMM TASK 27-96-00-710-020).
(2) Do the BITE test of the EFCS (Ground Scanning) (Ref. AMM TASK 27-96-00-740-001).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message:
CAPT ROLL CTL SSTU 4CE1
- remove the CAPT side stick assembly (Ref. AMM TASK 27-92-41-000-001).
(1) Examine the control rods, bellcranks and input levers of the transducer unit and take the corrective actions if necessary.
(2) If no mechanical problems:
- replace the SSTU-ROLL CTL, CAPT (4CE1), (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
(3) Install the CAPT side stick assembly (Ref. AMM TASK 27-92-41-400-001).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 217
Nov 01/01 CES
B. Do the operational test and the BITE test given in Para. 3.
Failure of the F/O Roll Control SSTU
1. Possible Causes
_______________
- SSTU-ROLL CTL, F/O (4CE2)
- control rods, bellcranks and input levers of the transducer unit
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R AMM 27-92-41-000-001 Removal of the Side Stick Assembly 19VU (18VU) AMM 27-92-41-000-002 Removal of the Transducer Units (4CE1,4CE2,4CE3,4CE4) R AMM 27-92-41-400-001 Installation of the Side Stick Assembly 19VU (18VU) AMM 27-92-41-400-002 Installation of the Transducer Units (4CE1,4CE2,4CE3,4CE4) AMM 27-96-00-710-020 Operational Test of the Side Stick Assembly (Activation for the BITE Test) AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning)
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the side stick assembly (activation for the BITE test) (Ref. AMM TASK 27-96-00-710-020).
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 飞行操纵 2(123)
