3. Fault Confirmation
__________________
A. Test
(1) Open the circuit breakers 14WH, 15WH, 17WH and 18WH, wait for approx. 10 s and close again, wait for a minimum of 30 s before you start the test.
(2) Do the operational test of the cargo compartment smoke detection (Ref. AMM TASK 26-16-00-710-001).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message:
- Do the trouble shooting procedure related to the maintenance message.
B. If the test gives the maintenance message SMK DET AFT LDCC (XWH) and SMK DET AFT LDCC (YWH) (XWH,YWH = FINs of the two related smoke detectors of the same cavity):
- replace the AFT LDCC smoke-detectors (Ref. AMM TASK 26-16-15-000-001) and (Ref. AMM TASK 26-16-15-400-001).
C. Do the test given in para. 3.
5. Close-up
________
A. Put the aircraft back to its initial configuration.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 301-399, 401-499, ∞∞26-16-00∞∞∞∞∞∞∞∞∞∞Page 209
Aug 01/05 CES
AFT LDCC Smoke-Detector Inoperative
1. Possible Causes
_______________
- AFT LDCC smoke-detector
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 26-16-00-710-001 Operational Check of Cargo-Compartment
Smoke-Detection by PTT
AMM 26-16-15-000-001 Removal of the Cargo Smoke Detectors
AMM 26-16-15-400-001 Installation of the Cargo Smoke Detectors
3. Fault Confirmation
__________________
A. Test.
(1) Open the circuit breakers 14WH, 15WH, 17WH and 18WH, wait for approx. 10 s and close again, wait for a minimum of 30 s before you start the test.
(2) Do the operational test of the cargo compartment smoke detection (Ref. AMM TASK 26-16-00-710-001).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message:
- Do the trouble shooting procedure related to the maintenance message.
B. If the test gives the maintenance message SMK DET AFT LDCC (XWH) (XWH = FIN of the related smoke detector):
- replace the AFT LDCC smoke-detector (Ref. AMM TASK 26-16-15-000-001) and (Ref. AMM TASK 26-16-15-400-001).
C. Do the test given in para. 3.
5. Close-up
________
A. Put the aircraft back to its initial configuration.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 301-399, 401-499, ∞∞26-16-00∞∞∞∞∞∞∞∞∞∞Page 210
Aug 01/05 CES AFT LDCC Smoke-Detector Contamination
1. Possible Causes
_______________
- AFT LDCC smoke-detector
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 26-16-00-710-001 Operational Check of Cargo-Compartment
Smoke-Detection by PTT
AMM 26-16-15-000-001 Removal of the Cargo Smoke Detectors
AMM 26-16-15-400-001 Installation of the Cargo Smoke Detectors
3. Fault Confirmation
__________________
A. Test
(1) Open the circuit breakers 14WH, 15WH, 17WH and 18WH, wait for approx. 10 s and close again, wait for a minimum of 30 s before you start the test.
(2) Do the operational test of the cargo compartment smoke detection (Ref. AMM TASK 26-16-00-710-001).
4. Fault Isolation
_______________
A. If the test gives a different maintenance message:
- Do the trouble shooting procedure related to the maintenance message.
B. If the test gives the maintenance message SMK DET AFT LDCC (XWH) CONTAMINATION (XWH = FIN of the related smoke detector):
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 FIRE PROTECTION 防火(77)
