• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-03-26 00:13来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 105VU ADIRS/ADIRU1/28VDC 6FP1 C02

R **ON A/C 001-049, 051-061, 101-105, 201-203,
 121VU ADIRS/ADIRU/2PWR/SHED 10FP N11 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08
 1EFF : ALL 1 34-14-00Page 513 1 1 May 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
121VU ADIRS/ADIRU/2/115VAC 4FP2 N07 121VU ADIRS/ADIRU/3/115VAC 4FP3 N06 121VU ADIRS/ADIRU/2/28VDC 6FP2 N05 121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
 **ON A/C ALL
 121VU AUTO FLT/FCU/2 9CA2 M21 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34

R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
 121VU ADIRS/ADIRU/2PWR/SHED 10FP N10 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N09 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N08 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N07 121VU ADIRS/ADIRU/2/115VAC 4FP2 N06 121VU ADIRS/ADIRU/3/115VAC 4FP3 N05 121VU ADIRS/ADIRU/2/28VDC 6FP2 N04 121VU ADIRS/ADIRU/3/28VDC 6FP3 N03

R **ON A/C 001-049, 051-099, 101-149, 151-199, 201-299, 401-499,
 Subtask 34-14-00-865-059
 D. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FAC1/28VDC 5CC1 B04 121VU AUTO FLT/FAC2/28VDC 5CC2 M19
 **ON A/C ALL
 4. Procedure
_________
 NOTE : In the test that follows, we use the name DDRMI for the VOR/DME RMI
____ and the VOR/ADF/DME RMI (refer to equipment on your aircraft).
 1EFF : ALL 1 34-14-00Page 514 1 1 Aug 01/05 1 1 1CES 1R **ON A/C 001-049, 101-105, 151-199, 201-210,

 

 Subtask 34-14-00-740-068-A
 A. BITE Test of the IR System
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. On the ADIRS CDU:
-
set the OFF/NAV/ATT selector switch related to the IR1 (IR2) (IR3) to NAV.

-
set the DATA DISPLAY selector switch to TK/GS,

 -
set the SYS DISPLAY selector switch to 1 (2) (3).


 2. On one MCDU, on the NAV page:
-
push the line key adjacent to the IR1 (IR2) (IR3) indication.

-
push the line key adjacent to the INTERFACE TEST indication.

- on the keyboard, push the function key to get to the INTERFACE TEST 2/2 page.

 -
push the line key adjacent to the START TEST indication.


On the ADIRS CDU:
-
the ON BAT light comes on for 5seconds,

-
the ALIGN legend of the IR1 (IR2) (IR3) annunciator comes on.


On the MCDU:
The IR1 (IR2) (IR3) page comes intoview.
The IR1 (IR2) (IR3) INTERFACE TEST 1/2page comes into view.
The IR1 (IR2) (IR3) INTERFACE TEST 2/2page comes into view.
-
from 0 to 2 seconds:* on the ADIRS CDU, the ON BAT light, the ALIGN (if the IRs are aligned) and FAULT legends come on then go off,

 -
from 2 seconds and more: * on the CAPT (F/O) PFD, the HDG warning flag is no more shown and these values come into view: ROLL 45 deg. Right PITCH 5 deg. Up. SLIP Left


R 1EFF : 001-049, 101-105, 151-199, 201-210, 1 34-14-00Page 515 1 1 May 01/05 1 1 1CES 1


 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
IVS -600 ft/mn.
 * on the CAPT (F/O) ND, the HDG
 warning flag is no more shown,
 * on the DDRMI, the HDG warning flag
 is no more shown,
 * the CAPT (F/O) ND shows these
 values:
 G/S 200 Kts
 WIND 030/100
 HDG 15 deg.
 * the DDRMI shows this value:
 HDG 15 deg.
 * on the ADIRS CDU, the left part of
 the display window shows this track
 angle true value:
 00.0
 The right part of the display window
 shows this ground speed value:
 0200
 3. On the ADIRS CDU, set the DATA  On the ADIRS CDU, the left part of the
 DISPLAY selector switch to HDG.  display window shows this true HDG
 value:
 010.0
 4. On the MCDU, push the line key  The test procedure stops.
 adjacent to the RETURN
 indication.
 5. On the ADIRS CDU:  On the ADIRS CDU:
 - set the OFF/NAV/ATT selector
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320飞机维护手册 AMM NAVIGATION 导航2(76)