R 1EFF : ALL 1 34-13-00Page 599 1 1 May 01/05 1 1 1CES 1
(4) On the overhead panel, on the ADIRS CDU, make sure that the OFF legend of the ADR pushbutton switches is off).
Subtask 34-13-00-010-056
B. Get Access
(1)
Put the access platformin position at the access door 822.
(2)
Open the access door 822.
(3)
On the battery power center 105VU:
-loosen the two screws and remove the protective cover.
Subtask 34-13-00-865-093
C. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/FCU/1 9CA1 B05 49VU L/G/LGCIU/SYS1/NORM 1GA C09 49VU NAV PROBES/ADIRU3/PWR/SWTG 8FP F09 49VU NAV PROBES/ADIRU 1/AND AOA 1/26VAC 5FP1 F07 49VU NAV PROBES/ADIRU1/115VAC 4FP1 F06
105VU ADIRS/ADIRU1/28VDC 6FP1 C02
R **ON A/C 001-049, 051-061, 101-105, 201-203,
121VU ADIRS/ADIRU/2PWR/SHED 10FP N11 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N10 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N09 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N08 121VU ADIRS/ADIRU/2/115VAC 4FP2 N07 121VU ADIRS/ADIRU/3/115VAC 4FP3 N06 121VU ADIRS/ADIRU/2/28VDC 6FP2 N05 121VU ADIRS/ADIRU/3/28VDC 6FP3 N04
**ON A/C ALL
121VU AUTO FLT/FCU/2 9CA2 M21 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
1EFF : ALL 1 34-13-00Page A500 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R **ON A/C 062-099, 106-149, 151-199, 204-299, 301-399, 401-499,
121VU ADIRS/ADIRU/2PWR/SHED 10FP N10 121VU ADIRS/ADIRU/3PWR/SWTG 9FP N09 121VU ADIRS/ADIRU/2/26VAC AND AOA 5FP2 N08 121VU ADIRS/ADIRU/3/26VAC AND AOA 5FP3 N07 121VU ADIRS/ADIRU/2/115VAC 4FP2 N06 121VU ADIRS/ADIRU/3/115VAC 4FP3 N05 121VU ADIRS/ADIRU/2/28VDC 6FP2 N04 121VU ADIRS/ADIRU/3/28VDC 6FP3 N03
**ON A/C ALL
4. Procedure
_________
Subtask 34-13-00-740-051
A. SYSTEM TEST of the ADR
NOTE : - The actions and the results of this procedure occur on the MCDU
____
used.
-It is not necessary to do an IR alignment procedure before you start the ADR SYSTEM TEST.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Push the line key adjacent to the ADR 1(ADR 2)(ADR 3) indication
2.
Push the line key adjacent to the SYSTEM TEST indication
3.
Push the line key adjacent to the START TEST indication
4.
Push the line key adjacent to the TEST CLOSE UP indication
The ADR 1(ADR 2)(ADR 3) page comes into
view.
The SYSTEM TEST page comes into view.
The TEST IN PROGRESS indication comes
into view.
At the end of the test, the TEST OK
indication comes into view.
These indications come into view:
-TEST CLOSE UP . IR RE-ALIGNMENT
-ENTER PPOS WITH AN UNUSED MCDU
1EFF : ALL 1 34-13-00Page A501 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------(Refer to the NOTE given above)
5. Push the line key adjacent to the The test procedure stops. RETURN indication
5. Close-up
________ Subtask 34-13-00-860-080
A. Put the aircraft back to its initial configuration.
(1)
On the MCDU, push the line key adjacent to the RETURN indication until the CFDS menu page comes into view.
(2)
Do the ADIRS stop procedure (Ref. TASK 34-10-00-860-005).
(3)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
Subtask 34-13-00-410-056
B. Close Access
(1)
Install the protective cover on the battery power center 105VU.
(2)
Tighten the two screws.
(3)
Close the access door 822.
(4)
Remove the access platform(s).
1EFF : ALL 1 34-13-00Page A502 1 1 May 01/05 1 1 1CES 1R **ON A/C 001-049, 101-105, 151-199, 201-203,
TASK 34-13-00-740-004 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：A320飞机维护手册 AMM NAVIGATION 导航2(13)
