2.
On the ground pressure generator:
-set a static pressure of 977.1 hPa (1000 ft or 305 m).
-Set a static pressure of 908.1 hPa (3000 ft or 915 m).
Make sure that the standby altimeterindicates 1000 ft (+ or - 20 ft) andthe metric altimeter indicates 305 m (+ or - 15 m).
-Make sure that the standby altimeterindicates 3000 ft (+ or - 30 ft) and the metric altimeter indicates 915 m (+ or - 20 m).
1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-00Page 517 1201-212, 214-220, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Set a static pressure of 843 - make sure that the standby altimeter
hPa (5000 ft or 1525 m) indicates 5000 ft (+ or - 40 ft) and
the metric altimeter indicates 1525 m
(+ or - 22 m).
- set a static pressure of 571.8 - make sure that the standby altimeter
hPa (15,000 ft or 4570 m). indicates 15,000 ft (+ or - 105 ft)
and the metric altimeter indicates
4570 m (+ or - 37 m).
- set a static pressure of 314.8 - make sure that the standby altimeter
hPa (29,000 ft or 8840 m). indicates 29,000 ft (+ or - 180 ft)
and the metric altimeter indicates
8840 m (+ or - 60 m).
- slowly decrease the pressure
until you get atmospheric
pressure.
3. Stop the ground pressure
generator.
**ON A/C 151-199, 201-212, 214-220,
Subtask 34-21-00-720-051-A
A. Test of the Standby Altimeter
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
On the standby altimeter, set a barometric pressure of 1013 hPa.
2.
On the ground pressure generator:
-set a static pressure of 977.1 hPa (1000 ft).
-Set a static pressure of 908.1 hPa (3000 ft).
-
Make sure that the standby altimeterindicates 1000 ft (+ or - 20 ft).
-
Make sure that the standby altimeterindicates 3000 ft (+ OR - 30 ft).
1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-00Page 518 1201-212, 214-220, 1Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
-Set a static pressure of 843 - make sure that the standby altimeter hPa (5000 ft). indicates 5000 ft (+ or - 40 ft).
-
set a static pressure of 571.8 - make sure that the standby altimeter hPa (15,000 ft). indicates 15,000 ft (+ or - 105 ft).
-
set a static pressure of 314.8 - make sure that the standby altimeter hPa (29,000 ft). indicates 29,000 ft (+ or - 180 ft).
-slowly decrease the pressure
until you get atmospheric
pressure.
3. Stop the ground pressure generator.
**ON A/C 001-049, 051-099, 101-105, 151-199, 201-212, 214-220,
5. Close-up
________ Subtask 34-21-00-860-054
A. Put the aircraft back to its initial configuration.
(1)
Disconnect the ground pressure generator.
(2)
Remove the adaptor from the standby static probe.
(3)
Remove the cover from the opposite standby static probe.
(4)
Install the slip on covers on the static probes.
(5)
Close the LGCIU circuit breakers and put the aircraft back to its inertial cofiguration (Ref. TASK 32-00-00-860-002).
(6)
De-energize the aircraft electrical circuits
(Ref. TASK 24-41-00-862-002).
1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-00Page 519 1201-212, 214-220, 1Aug 01/05 1 1 1CES 1 Subtask 34-21-00-865-055
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU L/G/LGCIU/SYS1/NORM 1GA C09 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35 121VU HYDRAULIC/LGCIU/SYS1/GRND SPLY 52GA Q34
1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-00Page 520 1201-212, 214-220, 1Aug 01/05 1 1 1CES 1 ALTIMETER - STANDBY (3FN) - REMOVAL/INSTALLATION
________________________________________________
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM NAVIGATION 导航2(104)
