__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps
No specific blanking plugs
No specific circuit breaker(s) safety clip(s)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-061, 101-105,
34-21-22-991-001 Fig. 401
R **ON A/C 062-099, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, 34-21-22-991-001-B Fig. 401A
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 401 1201-220, 1May 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
R 3. Job Set-up__________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-865-050 A. Open, safety and tag this(these) circuit breaker(s): -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-212, 214-220,
R 49VU NAV/STBY/ALTM **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, 16FN F14
R R 122VU LIGHTING/INSTL LT/MAIN INST/PNL AND/PED 4LF **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-010-050 B. Remove the thermoformed cover from the center instrument panel. **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Y04
R 4. Procedure_________ **ON A/C 001-049, 051-061, 101-105,
(Ref. Fig. 401/TASK 34-21-22-991-001)
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 402 1201-220, 1May 01/05 1 1 1CES 1
Standby Altimeter
Figure 401/TASK 34-21-22-991-001
R 1EFF : 001-049, 051-061, 101-105, 1 34-21-22Page 403 1 1 May 01/05 1 1 1CES 1
R **ON A/C 062-099, 151-199, 201-220,
Post SB 34-1280 For A/C 213-213,
(Ref. Fig. 401A/TASK 34-21-22-991-001-B) R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
Post SB 34-1280 For A/C 213-213,
Subtask 34-21-22-020-050
A. Removal of the Standby Altimeter (3FN)
(1)
Loosen the screws (1). Do not remove them.
(2)
Disengage the standby altimeter (2) from its housing.
(3)
Disconnect the electrical connector (6).
(4)
Disconnect the quick-disconnect coupling (5).
(5)
Remove the standby altimeter (2).
(6)
Put blanking caps on the disconnected electrical connectors (4) and (6).
(7)
Put blanking plugs on the disconnected line ends (3) and (5).
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 404 1201-220, 1May 01/05 1 1 1CES 1
Standby Altimeter Figure 401A/TASK 34-21-22-991-001-B
R 1EFF : 062-099, 151-199, 201-220, 1 34-21-22Page 405 1 1 May 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
TASK 34-21-22-400-001
Installation of the Standby Altimeter (3FN) 1. Reason for the Job__________________
Self Explanatory 2. Job Set-up Information______________________ A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 33-13-00-710-001 Operational Test of the Instrument and Panel Integral Lighting **ON A/C 001-049, 051-061, 101-105,
R 34-21-22-991-001 Fig. 401 **ON A/C 062-099, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, 34-21-22-991-001-B Fig. 401A
R 1EFF : 001-049, 051-099, 101-105, 151-199, 1 34-21-22Page 406 1201-220, 1May 01/05 1 1 1CES 1
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220,
R 3. Job Set-up__________ **ON A/C 001-049, 051-099, 101-105, 151-199, 201-220, Post SB 34-1280 For A/C 213-213, Subtask 34-21-22-865-051
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM NAVIGATION 导航2(105)
