S 964-009
(3)
Remove the used heater leads and install the new heater leads with a splice.
S 114-029
WARNING: DO NOT GET SOLVENT IN YOUR MOUTH, OR YOUR EYES, OR ON YOUR
_______ SKIN. DO NOT BREATHE THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
(4)
Clean the surfaces with a cheesecloth that is moist with solvent, Series 92 (AMM/SOPM 20-30-92) .
S 804-011
(5)
Apply the parting agent to the two faces of the heater gasket and shim.
S 394-012
(6)
Apply the sealant to the external skin surface and to the two faces of the shim and heater gasket.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-71-04
ALL ú ú 02 Page 403 ú May 28/99
A
757 MAINTENANCE MANUAL
(7) S 424-013Install the shim and heater gasket. (a) Make sure none of the wires stay out.
(8) S 434-024Install the drain duct nipple (AMM 38-32-16/401).
(9) S 704-025Do a test of the drain duct heating gasket installation. (a) Supply electrical power (AMM 24-22-00/201). (b) Make sure the heater gasket becomes warm. (c) Close the drain service door. (d) Remove electrical power, if it is not necessary.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
30-71-04
ALL ú ú 02 Page 404 ú May 28/99
中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:757 AMM 飞机维护手册 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(184)