S 862-019-002
(4)
Return the Airplane to Its Usual Condition
S 862-012-002
(5)
Remove the DO-NOT-CLOSE tags and close these P11 panel circuit breakers:
(a)
11R13, WSHLD WIPER LEFT
(b)
11R22, WSHLD WIPER RIGHT
S 862-015-002
(6) Remove the DO-NOT-CLOSE tags and close these P37 panel circuit breakers:
(a)
37E3, WINDOW HTR 2L
(b)
37E4, WINDOW HTR 3L
(c)
37J2, WINDOW HTR 1R
S 862-016-002
(7) Remove the DO-NOT-CLOSE identifiers, and close the P70 panel circuit breakers that follow:
(a)
70A3, WINDOW HTR 2R
(b)
70A4, WINDOW HTR 3R
(c)
70C13, WINDOW HTR L
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH HYDROPHOBIC COATING ON ú
30-43-00
THE NUMBER 1 WINDOWS ú CONFIG 2 ú 01 Page 202 ú May 28/99
A
757 MAINTENANCE MANUAL
WINDSHIELD RAIN REPELLENT NOZZLE - REMOVAL/INSTALLATION
_______________________________________________________
1. General_______
A. This procedure contains two tasks. The first task is the removal of the windshield rain repellent nozzle. The second task is the installation of the windshield rain repellent nozzle.
B. This procedure refers to the windshield rain repellent nozzles as nozzles.
C. The nozzles are in front of the captain's and first officer's No. 1 windows, forward of the windshield wiper arm. The removal/installation procedure is the same for the two nozzles.
TASK 30-43-01-004-001
2. Remove the Nozzle_________________
A. Access
(1) Location Zones
211/212 Control Cabin - Section 41
B. Procedure (Fig. 401)
S 864-002
(1) Open these circuit breakers on the overhead panel, P11, and attach DO-NOT-CLOSE tags:
(a)
11R12, RAIN REPEL RIGHT
(b)
11R21, RAIN REPEL LEFT
S 034-003
(2)
Loosen the check nut on the nozzle assembly.
(3)
Remove the nozzle assembly.
S 024-004
TASK 30-43-01-404-005
3. Install the Nozzle__________________
A. Equipment
(1) Water Source - to wet windshield
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 防冰和排雨 CHAPTER 30 - ICE AND RAIN PROTECTION(163)
