Page 98.103 D633W101-BEJ Sep 05/2002
CMCS -HARD DRIVE ADD PART NUMBER DIALOG BOXES -2
Select ENTER NEW NAME to show the hard drive change name dialog box. You can change the configuration name of the hard drive from this dialog box.
Select HARD DRIVE MAIN MENU to remove the dialog box and show the hard drive main menu dialog box.
Select HELP to show the help for this dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
Select GO BACK to remove the dialog box and return to the previous display.
Done Adding Failed Dialog Box
The done adding failed dialog box shows after you add a software part number to the hard drive and the CMCF determines it is not serviceable. The xxxx-xxx-xxx-xx is the software part number. The yyyyyyyyyyyyyyy is the configuration name of the hard disk. The zzzz is the configuration index of the hard drive. The configuration index is a four digit hexadecimal number. It determines if all the data on the hard drive is valid.
You must remove the copy of the software part number from the hard drive and load it again. You remove software part numbers from the hard drive main menu.
Select ENTER NEW NAME to show the hard drive change name dialog box. You can change the configuration name of the hard drive from this dialog box.
Select HARD DRIVE MAIN MENU to remove the dialog box and show the hard drive main menu dialog box.
Select HELP to show the help for this dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
Select GO BACK to remove the dialog box and return to the previous display.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.104
D633W101-BEJ Sep 05/2002
CMCS -HARD DRIVE ADD PART NUMBER DIALOG BOXES -2
EFFECTIVITY BEJ ALL 45-10-00
Page 98.105
D633W101-BEJ Sep 05/2002
CMCS -HARD DRIVE ADD PART NUMBER DIALOG BOXES -3
Stop Are You Sure Dialog Box
The stop are you sure dialog box shows after you select STOP from the adding part number dialog box. The dialog box tells you to select STOP to end the process to add software part number xxxx-xxx-xxx-xx to the hard drive.
Select STOP to stop the software part number transfer to the hard drive.
Select HELP to show the help for this dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
Select GO BACK to remove the dialog box and return to the adding part number dialog box.
Not Added Dialog Box
The not added dialog box shows after you select STOP from the stop are you sure dialog box. It shows you that the software part number was not added to the hard drive. The xxxx-xxx-xxx-xx is the software part number. The yyyyyyyyyyyyyyy is the configuration name of the hard disk. The zzzz is the configuration index of the hard drive. The configuration index is a four digit hexadecimal number. It determines if all the data on the hard drive is valid.
Select ENTER NEW NAME to show the hard drive change name dialog box. Change the configuration name of the hard drive from this dialog box.
Select HARD DRIVE MAIN MENU to remove the dialog box and show the hard drive main menu dialog box.
Select HELP to show the help for this dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
Select GO BACK to remove the dialog box and return to the previous display.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.106
D633W101-BEJ Sep 05/2002
CMCS -HARD DRIVE ADD PART NUMBER DIALOG BOXES -3
EFFECTIVITY BEJ ALL 45-10-00
Page 98.107
D633W101-BEJ Sep 05/2002
CMCS -HARD DRIVE ADD PART NUMBER DIALOG BOXES -4
Part Number Already There Dialog Box
The part number already there dialog box shows if the software part number you chose to add to the hard drive is already on the hard drive. The CMCF allows only one copy of the same software part number on the hard drive. The xxxx-xxx-xxx-xx is the software part number.
Select HARD DRIVE MAIN MENU to remove the dialog box and show the hard drive main menu dialog box.
Select HELP to show the help for this dialog box. Help text for the dialog box must be in the CMCF AMI for HELP to show.
Select GO BACK to remove the dialog box and return to the hard drive source selection dialog box.
Not Enough Memory Dialog Box
The not enough memory dialog box shows if there is not enough memory on the hard drive to add the software part number you chose. You will need to remove one or more software part numbers from the hard drive to make enough memory available. The xxxx-xxx-xxx-xx is the software part number. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：777 AMM 飞机维护手册 中央维护 Central Maintenance(46)
