EFFECTIVITY BEJ ALL 45-10-00
Page 98.22
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
CMCS -GROUND TESTS TEST DISPLAY
EFFECTIVITY BEJ ALL 45-10-00
Page 98.23
D633W101-BEJ Sep 05/2002
CMCS -GROUND TESTS DISPLAYS -2
General
The test condition messages and the test control button show the current status of the test and give the next control selection.
These are the two possible displays that show:
*
Test failed display
*
Test stopped display.
Test Failed Display
The test failed display shows the test condition message FAILED and gives the operator the control command to OPERATE TEST AGAIN.
The title of the variable text field is CAUSE and the variable text field shows the maintenance message groups or messages associated with the failure.
The MAINTENANCE MESSAGE DATA button lets you see a single maintenance message after the selection of that maintenance message.
The NEW TEST function remains the same.
Test Stopped Display
After a tests starts, the test condition message changes to OPERATING and the control command changes to STOP TEST.
The test can be stopped by you or by the system.
When you stop the test, the test condition message changes to STOPPED and the button changes to OPERATE TEST AGAIN. The variable text field title is CAUSE and the variable text field shows the message:
* Test stopped due to user request.
When the system stops the test, the test condition message changes to STOPPED and the button changes to OPERATE TEST AGAIN. The variable text field title is CAUSE and the variable text field shows the message:
* Test stopped due to member system request.
The MAINTENANCE MESSAGE DATA button is not available from this display.
The NEW TEST function remains the same.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.24
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
CMCS -GROUND TESTS DISPLAYS -2
EFFECTIVITY BEJ ALL 45-10-00
Page 98.25
D633W101-BEJ Sep 05/2002
CMCS -GROUND TEST INTERACTIVE DIALOG BOX
General
The ground test interactive dialog boxes show only if your interaction is necessary to complete the test.
The member systems control the interactive displays. LRUs in the member systems send a control signal that tells the CMCF to show the interactive displays as necessary. When the CMCF gets the control signal, it removes the current interactive display that shows.
Each interactive dialog box shows:
*
Dialog box title
*
Test title
*
Messages
*
Exclusive selections
*
Buttons.
Test Title
The test title shows the title of the test from the initial selection on the Ground Tests selection dialog box.
Messages
The messages area shows directions to successfully run and complete the test.
The message area also shows any warnings for the test.
If there is more text to show than can fit in the message area, a scroll bar shows.
Exclusive Selections
The member systems define the exclusive selections. The selections permit communication between you and the LRU under test.
Each interactive dialog box can show a maximum of ten exclusive selections.
Only the required number of exclusive selections show for each test. The ground test interactive dialog box grows to fit the buttons.
Buttons
The CONTINUE button shows dim or is not available if exclusive selections are not available or until you make an exclusive selection.
After you make an exclusive selection, select CONTINUE to cause that selection to go to the LRU. The CMCF removes the interactive dialog box. The CMCF then starts the test.
Select STOP TEST to remove the interactive dialog box and cause the TEST CONDITION message on the system test screen to show STOPPED. The control selection shows OPERATE TEST AGAIN.
EFFECTIVITY BEJ ALL 45-10-00
Page 98.26
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
CMCS -GROUND TEST INTERACTIVE DIALOG BOX
EFFECTIVITY BEJ ALL 45-10-00
Page 98.27
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
THIS PAGE IS INTENTIONALLY LEFT BLANK
45-10-00
Page 98.28 D633W101-BEJ Sep 05/2002
CMCS -GROUND TESTS INHIBIT AND INTERFERENCE DIALOG BOXES
Test Inhibit Dialog Box
When the TEST CONDITION message shows INHIBITED, the control button changes to TO TEST. 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：777 AMM 飞机维护手册 中央维护 Central Maintenance(28)
