(a)
Turn MODE SEL switch to MAN GS. Momentarily press thrust lever GO-AROUND switch. Check that APD GA annunciation is green, that mode selector rotates to GA position, and that V-bars indicated pitchup command.
(b)
Center V-bars by tilting VG-1 in pitch axis, and that tilt table reads 14 ±3 degrees pitchup. Level VG-1.
(c)
Set mode selector in AUTO APP position. Check that GA annunciator goes off and that VOR/LOC and GS annunciations are green. Momentarily press thrust lever GO-AROUND switch. Check that mode switch rotates to GA position that APD GA annunciation is green, and that V-bars indicate pitchup and wings level command.
(d)
Rotate heading marker and pitch command knob on mode selector. Check that V-bar does not respond and APD continues to indicate green GA only.
(e)
Tilt VG-1 20 degrees in right roll. Check that V-bar command indicates fly-left command and that APD GA annunciation remains green.
(f)
Level VG-1. Set heading cursor to angle 10 degrees greater than airplane heading. Switch mode selector rapidly to HDG position. Check that V-bar command indicates fly-right command and that APD GA annunciation remains green.
(2)
F/O's Side:
