STANDARD TOOLS - GENERAL 20-25-00
DESCRIPTION AND OPERATION 1 ALL General 1 ALL Structure of the Chapters 1 ALL
Stripping Tools (Ref. 20-25-10) 1 ALL Crimping Tools (Ref. 20-25-20) 1 ALL Shrinking Tools (Ref. 20-25-30) 1 ALL Insertion/Extraction Tool (Ref. 1 ALL 20-25-40) Miscellaneous Tools (Ref. 1 ALL 20-25-50) Electrical cable marking tools 1 ALL (Ref. 20-25-60)
Checking Procedure 1 ALL STRIPPING TOOLS 20-25-10
DESCRIPTION AND OPERATION 1 ALL General 1 ALL Structure of the Chapters 1 ALL
General requirements for 1 ALL Stripping electrical cables (Ref. 20-25-11) Stripping tools - Description 1 ALL and operation (Ref. 20-25-12)
GENERAL REQUIREMENTS FOR STRIPPING OF 20-25-11 ELECTRICAL CABLES
20-CONTENTS Page 1 Apr 01/05 R
__________CHAPTER 20
STANDARD PRACTICES-AIRFRAME
_________________TABLE OF CONTENTS
_______SUBJECT ________CH/SE/SU _C ____ ___________PAGE EFFECTIVITY
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Definition 1 ALL
Stripping procedure 1 ALL
The product to strip : 1 ALL
The stripping length 1 ALL
Stripping procedure for each 4 ALL
applicable tool :
Specific requirements and faults 10 ALL
for Stripping
STRIPPING TOOLS 20-25-12
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Scalpels, cutter or equivalent 1 ALL
tool
Conditions of application 1 ALL
Stripmaster tools 3 ALL
Example of stripping tools 3 ALL
Content of jaws set 5 ALL
Wire gauge code on stripping die 5 ALL
Stripping tool allocation table 6 ALL
CRIMPING TOOLS 20-25-20
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Structure of the Chapters 1 ALL
General Requirements for 1 ALL
Crimping of Electrical
Connections (Ref. 20-25-21)
Hand Crimping Tools (Ref. 1 ALL
20-25-22)
Hydraulic Hand Crimping Tools 1 ALL
(Ref. 20-25-23)
Pneumatic Crimping Tools (Ref. 1 ALL
20-25-24).
Miscellaneous Crimping Tools 1 ALL
(Ref. 20-25-29).
GENERAL REQUIREMENT FOR CRIMPING OF 20-25-21
ELECTRIC CONNECTIONS
DESCRIPTION AND OPERATION 1 ALL
General 1 ALL
Definition 1 ALL
Design Requirements 1 ALL
Tensile Strength 1 ALL
Geometrical Distortion of the 1 ALL
End Fittings
Position of Wire Insulation 3 ALL
20-CONTENTS Page 2
Apr 01/05
R
__________
_________________TABLE OF CONTENTS
_______ ________SUBJECT CH/SE/SU _C ____ ___________PAGE EFFECTIVITY
after Crimping (Barrel Closed)
and (Open Barrel)
Procedure 3 ALL
Pre-crimping checks 3 ALL
Post-crimping checks 3 ALL
Periodic Tests 6 ALL
Test Intervals 6 ALL
Gauging of Tools : 6 ALL
Labelling of Specimens 8 ALL
HAND CRIMPING TOOLS 20-25-22
DESCRIPTION AND OPERATION 1 ALL
List of Described Tools 1 ALL
MS3191 and MS3291A Hand Crimping 2 ALL
Tool
Example of connection P/N used 2 ALL
with this tool
Designation 2 ALL
Vendors 2 ALL
M22520/2-01, M22520/7-01, MS3198 4 ALL
and MS3198-1 Hand Crimping Tools
Example of connection P/N used 4 ALL
with this tool
Designation 5 ALL
Vendors 8 ALL
Table of Standard Positioners 8 ALL
AMP Hand Crimping Tool P/N 59500 9 ALL
Example of connection P/N used 9 ALL
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 ESPM Electrical Standard Practices Manual 1(21)
