CAUTION : PUT THE PARKING BRK CONTROL SWITCH IN THE OFF POSITION BEFORE_______ YOU TOW OR PUSH BACK THE AIRCRAFT. THIS IS TO PREVENT HIGH LOADS WHICH CAN CAUSE DAMAGE TO THE NOSE LANDING GEAR.
(1) On the N/W-steering deactivation electrical-box 5GC: - set the ground-towing control lever to the towing position.
(2) Install the PIN (D23156000). (Ref. Fig. 206/TASK 09-10-00-991-005)
(3) Do an EIS start procedure (Ref. TASK 31-60-00-860-001).
(4) On the upper ECAM DU, on the MEMO page: - the N WHEEL STEERG DISC indication comes into view.
R R NOTE : It is optional to install the landing-gear safety devices when____ you tow or push the aircraft during flight operations (To put the aircraft in position for the flight crew at arrival or departure).
(5) Make sure that safety devices are installed on the landing gears (Ref. TASK 32-00-00-481-001).
(6) Make sure that the engine cowls are closed.
Subtask 09-10-00-210-062
B. Aircraft Stability
(1) Make sure that the aircraft is stable (Ref. TASK 05-57-00-200-001).
Subtask 09-10-00-480-055-A
C. Installation of the Towbarless Tractor
R R R R R R R R CAUTION : AIRBUS STRONGLY RECOMMENDS THAT THE OPERATORS OF TOWBARLESS_______ TRACTORS CAREFULLY ALIGN THE CLAMPING DEVICE OF THE TRACTOR WITH THE NOSE LANDING GEAR AXIS. THE GAP BETWEEN THE CRADLE AND THE TORQUE-LINK IS VERY SMALL AND A MISALIGNMENT CAN CAUSE DAMAGE TO THE TORQUE-LINK PIN. A SIMPLE ALIGNMENT DEVICE ON THE TRACTOR (MARKING, METAL INDICATOR, ETC. SUPPLIED BY THE MANUFACTURER OF THE TOWBARLESS TRACTOR OR MANUFACTURED LOCALLY) CAN HELP THE DRIVER.
NOTE : This procedure gives general instructions for installation of the____ towbarless tractor. For more instructions related to the operation
of the tractor (loading/unloading, etc.), refer to the tractor manufacturers instructions.
NOTE : This procedure is for towing of the aircraft in maintenance
____ configuration only and is not for operational towing. Do not use a towbarless tractor to tow the aircraft to a dispatch area near the runway threshold.
(1) There are special approval procedures for towbarless tractors. Before R towing, be sure that the towbarless tractor is approved for towing R this aircraft. For more information on the towbarless tractors, refer R to the SIL 09-002.
(2)
Set the aircraft type on the towbarless tractor, if necessary.
(3)
Make sure that the parking brake is applied.
(4)
Remove the wheel chocks.
(5)
Align the clamping device of the tractor with the NLG axis.
(6)
Lock on and lift the NLG.
(7)
Release the parking brake.
(8)
Make sure that the nose landing gear is correctly on the center of the tractor platform and cannot be disengaged from the tractor.
Subtask 09-10-00-861-051
D. Energize the aircraft electrical circuits
(1)
With the tractor (if the tractor has a GPU) (Ref. TASK 24-41-00-861-002).
(2)
Or with the APU (Ref. TASK 24-41-00-861-002).
(3)
Or with the engine 1(2) (Ref. TASK 24-41-00-861-002).
Subtask 09-10-00-860-061
E. Set the Lighting System and the Communication System to this
Configuration
(1)
Lighting system on the panel 25VU:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM TOWING & TAXIING(7)
