(3)
Put the movable taxiway plates in front of the wheels to make the ground solid.
(4)
Connect the CABLE, TOWING - MLG (98A09001002000) or CABLE, TOWING -MLG (98A09003500000) to the tractor.
(5)
Install the BAR - STEERING NOSE WHEEL (98A09003000001) on the nose landing gear.
R EFF : ALL 09-10-00Page 234 Aug 01/05 CES
Towing Attachment
Figure 210/TASK 09-10-00-991-014
R EFF : 001-003, 051-052, 09-10-00Page 235 Aug 01/05 CES R **ON A/C 004-049, 053-099, 101-149, 151-199, 201-299, 301-399, 401-499,
Subtask 09-10-00-480-052-A
C. Installation of the Towing Strap and Towing Cable
(Ref. Fig. 210A/TASK 09-10-00-991-014-A)
WARNING : MAKE SURE THAT THE NLG DOWNLOCK SAFETY PIN AND THE TWO DOOR
_______
SAFETY PINS ARE INSTALLED.
(1)
Use a towing strap with the properties that follow:
-Length 2160 mm (85.0394 in.)
-Width 100 mm (3.9370 in.)
-Safe working load 13000 daN (29225.1570 lbf).
(2)
Wind the towing strap around the bottom of the MLG shock absorber and the axles.
NOTE : Make sure the towing strap does not touch the links of the
____
MLG.
(3)
Connect the CABLE, TOWING - MLG (98A09001002000) or CABLE, TOWING -MLG (98A09003500000) to the towing strap.
(4)
Put the movable taxiway plates in front of the wheels to make the ground solid.
(5)
Connect the CABLE, TOWING - MLG (98A09001002000) or CABLE, TOWING -MLG (98A09003500000) to the tractor.
(6)
Install the BAR - STEERING NOSE WHEEL (98A09003000001) on the nose landing gear.
**ON A/C ALL
Subtask 09-10-00-860-056
D. Set the Lighting System and the Communication System to this
Configuration
(1) On the panel 25VU:
-
set the EXT LT/NAV & LOGO switch to ON,
-
set the EXT LT/BEACON switch to ON,
-
set the INT LT/DOME switch to BRT.
R EFF : ALL 09-10-00Page 236 Aug 01/05 CES
Towing Attachment Figure 210A/TASK 09-10-00-991-014-A
R EFF : 004-049, 053-099, 101-149, 151-199, 09-10-00Page 237 201-299, 301-399, 401-499, Aug 01/05 CES
(2)
VHF System
-If communication is necessary between the aircraft and the control tower, on the RMP (Radio Management Panel) 11VU, push the VHF1 pushbutton switch. On the panel 60VU, connect a boomset.
(3)
Flight Interphone System
-On the panel 108VU, connect a boomset to the FLT INT socket. This lets you speak to the cockpit.
4. Procedure
_________
Subtask 09-10-00-584-052
A. Towing
WARNING : MAKE SURE THAT WHEN THE AIRCRAFT MOVES WITH ITS POWER ON THE
_______
GROUND
-
NO PERSONS GO WHERE THE AIRCRAFT CAN CAUSE THEM INJURY OR CAN KILL THEM
-
NO OBJECTS STAY WHERE THE ENGINES CAN BLOW THEM AWAY OR CAN PULL THEM INTO THE ENGINES BY SUCTION.
WARNING : MAKE SURE THAT THE NLG DOWNLOCK SAFETY PIN AND THE TWO DOOR
_______
SAFETY PINS ARE INSTALLED.
WARNING : DURING TOWING/TAXIING OPERATIONS (LOW-SPEED OPERATIONS
_______ INCLUDED), EACH PERSON IN THE AIRCRAFT MUST BE IN A SEAT AND THE SEAT BELT MUST BE FASTENED. IF THE SEAT BELT IS NOT FASTENED, THERE IS A RISK OF INJURY IF THE AIRCRAFT STOPS SUDDENLY.
(1)
Tow the aircraft (Ref. TASK 09-10-00-584-001).
(2)
Where possible, keep the tractor aligned with the aircraft centerline. The maximum lateral position that is permitted is the width of the aircraft. (Ref. Fig. 205/TASK 09-10-00-991-004)
NOTE : During the towing operations, put:
____ - one person in the cockpit to operate the brakes if necessary,
-two persons to monitor the wing tips.
EFF : ALL 09-10-00Page 238 Aug 01/05R CES
5. Close-up
________
Subtask 09-10-00-210-059
A. Visual Inspection R (1) After you have completed the towing operation make sure that the nose
R wheels are aligned with the aircraft centerline. Subtask 09-10-00-860-057
B. Aircraft Maintenance Configuration
(1)
Put the wheel chocks in position in front of and behind the wheels of the NLG and MLG.
(2)
On the panel 110VU:
-set the PARKING BRK control-switch to ON.
(3)
On the panel 400VU:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM TOWING & TAXIING(10)
