曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
bottom of the MFD bezel, a n d b y t h e
MFD/FMS controller on the cockpit pedestal,
below the throttle quadrant (Figure 16-33,
Tables 16-6 and 16-7).
MFD Softkeys
MFD softkey functions are variable depending
on user inputs. Each softkey has a label
above it, which indicates its current function.
MFD/FMS Controller
The MFD/FMS controller includes an alphanumeric
keypad for direct entry of numbers
and text.
Dual FMS Knob
The dual FMS knob on the MFD/FMS controller
is the main control for selecting most
MFD functions. The large knob selects page
groups, while the small knob selects individual
pages within the selected group.
For data entry, pressing the dual FMS knob activates
the cursor, which allows the user to
input new data. While the cursor is active, rotating
the large FMS knob allows the user to
move to different data entry locations on the
display, as indicated by cursor movement.
While the cursor is active, rotating the small
FMS knob allows the user to change the text
or data at the cursor location.
Rotating the FMS knob causes each possible
character to display sequentially. When the
correct entry at the cursor location is selected
with the small FMS knob, confirm by pressing
the ENT key. It moves to the next position
when you press ENT.
510OM-00 16-27
CITATION MUSTANG OPERATING MANUAL
TIMER 01:04:45 UP STOP?
REFERENCES
Figure 16-31. Timer References Window
16-28 510OM-00
CITATION MUSTANG OPERATING MANUAL
Figure 16-32. Multifunction Display
510OM-00 16-29
CITATION MUSTANG OPERATING MANUAL
1 3 2 4 5
6
7
8
9
14 13 12 11 10
Figure 16-33. MFD Controller
16-30 510OM-00
CITATION MUSTANG OPERATING MANUAL
CAS
CAS
MAP
TRAFFIC
TOPO
TERRAIN
SW CHRT
CHKLIST
AIRWAYS
NEXRAD
XM LTNG
BACK
DCLTR
AIRWY ON
AIRWY LO
AIRWY HI
DCLTR-1
DCLTR-2
DCLTR-3
MFD
SOFTKEYS FUNCTION
Scroll up (enabled only when a sufficient number of items are displayed in the
crew alerting system display to warrant scrolling)
Scroll down (enabled only when a sufficient number of items are displayed in
the crew alerting system display to warrant scrolling)
Enables second-level Navigation Map softkeys
Displays traffic information on Navigation Map
Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and
elevation scale on Navigation Map
Displays terrain information on Navigation Map
AIRWAYS: Displays airways on the map when next level softkeys are pressed
(default label is dependent on map setup option selected); cycles through the following:
AIRWY ON: All airways are displayed
AIRWY LN: Only low-altitude airways are displayed
AIRWY HI: Only high-altitude airways are displayed
Displays NEXRAD weather and coverage information on Navigation
Map (optional feature)
Displays XM lightning information on Navigation Map (optional feature)
Returns to top-level softkeys
Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA data
DCLTR-3: Removes everything except for the active flight plan
When available, displays optional airport and terminal procedure charts
When available, displays optional checklists
Table 16-6. MFD SOFTKEYS
# CONTROL DESCRIPTION
1 Dual FMS Knob Flight management system knob. This knob selects the MFD page to be viewed; the large knob
selects a page group (MAP, WPT, AUX, NRST), while the small knob selects a specific page within the
page group. Pressing the FMS Knob turns the selection cursor ON and OFF. When the cursor is ON,
data may be entered in the applicable window by turning the small and large knobs. In this case, the
large knob moves the cursor on the page, while the small knob selects individual characters for the
highlighted cursor location.
2 Direct-to Key Allows the user to enter a destination waypoint and establish a direct course to the selected
destination (the destination is either specified by the identifier, chosen from the active route, or taken
from the map pointer position).
3 FPL Key Displays the active flight plan page for creating and editing the active flight plan, or for accessing
stored flight plans.
4 MENU Key Displays a context-sensitive list of options. This list allows the user to access additional features or
make setting changes that relate to particular pages.
5 PROC Key Gives access to IFR departure procedures (DPs), arrival procedures (STARs) and approach
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
CITATION MUSTANG OPERATING MANUAL 2(24)
