737-700 AVIONCS BITE HANDBOOK 航电自测设备手册 2(37)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

Move the switch to the right to start a FDAU test. You see these indications:
-Lamp test
-With no BITE errors, NO FAULT shows
-With FDAU errors, the error code shows.

When an error code shows, move the switch to the right again to show more error codes. The display is blank when there are no more error codes.
31-31

A31-31-00-032.fm
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

FDRS -TRAINING INFORMATION POINT - FDAU BITE
Move the switch to the left to look for ACMS errors. When there is an ACMS fault, the digital display shows the error codes. When an error code shows, move the switch to the right to show more error codes.
January 2005
31-31

- 328 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

A31-31-00-032.fm
PCMCIA CARD EJECT SWITCHES
DMF BITE
R
LATCH MUST

BITE DISPLAY
L IN PROG
R E
BE DOWN TO
XFER
R
COMP
F
PCMCIA CARD LATCH
T
RETAIN CARDS
XFER FAIL
R
IN FLIGHT
R
IN PROG
R
I
G
XFER
COMP
R
H
PCMCIA CARD
T
SLOTS (2)
XFER FAIL
R
DOOR DOOR SOFTWARE LOAD LATCH INDICATIONS
LATCH MUST
BE DOWN TO
RETAIN CARDS
IN FLIGHT

ATE CONNECTOR
CAGE CODE: 97895 PN: 967-0212
DIGITAL
ACMS WEIGHT 19.0 LBS (8.63 KGS) MAX
READOUT
DFDR POWER: 35W MAX, 115V. 400HZ
LED STATUS
DFDAU SERIAL NO.
MFR DATE
MOD STATUS
INDICATORS
12345 79
6810
(3)
DFDAU ACMS
11121314 151617181920
BITE TOGGLE
SWITCH

FDRS - TRAINING INFORMATION POINT - FDAU BITE
January 2005
31-31

- 329 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

FDRS - SOFTWARE LOADING AND DOWNLOADING
Software or Data Load You can load software into the FDAU or download data from the ACMS. downloads the report data to the diskette. The data loader shows that the load is done.
The software contains standard computer programs for maintenance and operations. It also has computer programs for special needs.
ACMS can download reports to a diskette.
Operation to Load Software
To load software into the ACMS, use the data loader control panel. On the top switch, select SINGLE SYS. On the bottom switch, select the ACMS position on the data loader control panel to load software for the DMU master controller. Select the DFDAU position to load software for the FDAU master controller.
Put the diskette in the portable data loader and connect the portable data loader to the data transfer unit receptacle.
When the data load is complete, you can verify the new software part number on the FDAU front panel.
Operation to Download Report Data
The ACMS can download report data to a diskette. The diskette must be preformatted to accept the download of report data.
To download the report data, select the ACMS position on the data loader control panel. Put the formatted diskette in the portable data loader. When the airplane is on the ground, the FDAU automatically
- 330 -