20-11-05
ALL ú
ú 02 Page 867
ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
SEAL AREA
MEASUREMENT
AREA
NOTE: I.D. AFTER SWAGE REQUIREMENTS-MEASURING METHOD FOR 35211 SLEEVE AND 35212 UNION.
TUBE O.D./DASH NO. TUBE WALL TORQUE I.D. AFTER SWAGE
TUBE MATERIAL: 3AI-2.5V TITANIUM PER AMS4945
0.250/-04 0.016 6-7 0.225-0.232
0.375/-06 0.019 11-12 0.347-0.354
0.500/-08 0.026 20-22 0.458-0.465
0.625/-10 0.032 40-43 0.575-0.587
0.750/-12 0.039 40-43 0.684-0.695
1.000/-16 0.051 65-68 0.913-0.919
SWAGING TORQUE AND I.D. AFTER SWAGE REQUIREMENTS
FOR 35211 SLEEVE AND 35212 UNIONS
Harrison Portable Swagers for BACS13BX Sleeves
Figure 813 (Sheet 5)
L09171
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú
ú 02 Page 868
ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09223
TUBE SIZE
04
05
06
Swage Pressures for Elastomer Swaging Flareless SleevesFigure 814 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.ú
20-11-05
ALL úú 02 Page 869 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
08
* SWAGE PRESSURES NECESSARY TO INSTALL BACS13BX FLARELESS SLEEVES ON TUBE MATERIALS WITH THE HARRISON PORTABLE AND STATIONARY SWAGERS
304 CRES (MIL-T-8504), 321 AND 347 CRES (MIL-T-8808)
304 1/8 HARD CRES (MIL-T-6845)
MINIMUM SWAGE PRESSURE - IF YOU MUST SWAGE AGAIN, INCREASE IN 5% INCREMENTS.
A747-400MAINTENANCE MANUAL
A
747-400
MAINTENANCE MANUAL
Swage Pressures for Elastomer Swaging Flareless Sleeves
Figure 814 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 870 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09305
A
747-400
MAINTENANCE MANUAL
TUBE
OD
04 05 06 08 10 12 16 20 24
|0.010 P 0.214 0.230 0.230 0.285 0.330 0.330 0.392 0.395 0.355 2 1 0.465 0.350 2 1
max A 0.374 0.437 0.493 0.673 0.789 0.964 1.214 1.474 1.723
max G 0.298 0.364 0.423 0.550 0.686 0.822 1.070 1.323 1.573
max H 0.260 0.322 0.385 0.511 0.636 0.761 1.011 1.262 1.517
DIMENSION
____ALL DIMENSIONS ARE IN INCHES.
NOTE:
DIMENSIONS OF FLARELESS TUBE ENDS AND BACS13BX SLEEVES AFTER ELASTOMERIC SWAGING
ALL EXCEPT SHORT FLARELESS SHORT FLARELESS
BACS13BX Flareless Sleeve Dimensions After Elastomeric Swaging
Figure 815
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 871 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09391
A
747-400
MAINTENANCE MANUAL
AFTER ZERO
TUBE
BACS13BX (TWO GROOVES)
04 SIZE TUBE 0.020 MINIMUM DEPTH 2A 0.032 MAXIMUM - INCHES
05 0.020 0.032
06 0.020 0.032
08 0.020 0.032
10 0.022 0.034
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-400 AMM 飞机维护手册 STANDARD PRACTICES - AIRFRAME(45)
