曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
PROCESS” message appears on the MCD.
‐ A TMPY F-PLN changes the title of the flight plan pages. (TMPY appears in all titles).
‐ The predictions are continually updated for a temporary flight plan.
Temporary data is displayed in yellow (ND and MCDU). Once inserted, it becomes active and is
displayed in green.
INSERTING AN AIRWAY WITH "VIA"
Applicable to:
,
,
MSN,,
4538,,
GENERAL
In the active F-PLN, the crew can insert up to 5 successive airways segments, going from a
revised waypoint or ending at a given waypoint of the flight plan.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-18 P 3/44
FCOM 19 AUG 10
SELECT the revised waypoint (Here : CDN).
PRESS [ 5R ] to select the AIRWAYS prompt.
TO INSERT SUCCESSIVE AIRWAY SEGMENTS FROM A WAYPOINT
For example, from CDN - Airways UB19 - Airways UB25 - Ending point AAA.
WRITE the first airway ident in the scratchpad (here : "UB19").
PRESS [ 1L ] to insert it into the VIA field.
WRITE the second airway ident in the scratchpad (here : "UB25").
PRESS [ 2L ] to insert it into the VIA field.
The system automatically determines the first downpath intersection point between the two
airways.
‐ if the airways have a common waypoint, the system selects it as the ending point of the first
airway.
‐ If they have no common waypoint, but have a single intersection, the system creates this
intersection as an FM-computed point and displays “X”, followed by the second airway’s ident
(here XUB25).
‐ If they have no common waypoint or intersection, the system displays NO INTERSECTION
FOUND in the scratchpad.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-18 P 4/44
FCOM 19 AUG 10
When the required airways (up to 5) have been entered, the crew enters the ending point of the
last selected airway :
WRITE the ending waypoint in the scratchpad (here : "AAA").
PRESS [ 2R ] to insert the ending waypoint into the TO field.
Note: If two waypoints with the same ident belong to the same airway, the DUPLICATE
NAMES page will not be called up, and the system selects the first one in the database.
ACCESS the TMPY flight plan [ 6R ], review it (and revise it if necessary) and insert it.
TO INSERT ONE AIRWAY SEGMENT TO AN ENDING WAYPOINT
WRITE the airway ident in the scratchpad (here : "UB19").
PRESS [ 1L ] to insert it into the VIA field.
WRITE the ending waypoint in the scratchpad (here : "PON").
PRESS [ 1R ] to insert it into the TO field.
Note: If the revise waypoint, or the ending waypoint, does ‐ not belong to the entered airway,
the system displays AWY/WPT MISMATCH in the scratchpad.
‐ If two waypoints with the same ident belong to the same airway, the DUPLICATE
NAMES page will not be called up, and the system selects the first one in the
database.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-18 P 5/44
FCOM 19 AUG 10
FLIGHT PLAN INSERTION
The flight crew uses the “< TMPY F-PLN” prompt to access and review the TMPY F-PLN.
When the TMPY F-PLN has been checked, and if necessary modified, the crew inserts it.
PRESS [ 6L ] to access the temporary F-PLN, and revise it as necessary.
PRESS the [ 6R ] key to insert the temporary in the active F-PLN.
Clear the discontinuity, as needed.
Note: If the revise waypoint, or the ending waypoint does not belong to the entered airway, the
system rejects the VIA entry, and displays AWY/WPT MISMATCH in the scratchpad.
INSERTING A WAYPOINT
Applicable to:
,
,
MSN,,
4538,,
GENERAL
Waypoints can be inserted by means of a lateral revision at the “NEXT WAYPOINT”. This process
creates a temporary flight plan. This method enables the temporary flight plan to be checked
before it is inserted.
WAYPOINT IDENTIFICATION
The pilot can identify a waypoint by :
Its identifier ‐ (if it is in the navigation database).
‐ A Latitude/Longitude (LL).
‐ A Place/Bearing/Distance (PBD). The waypoint is defined by its bearing and distance from a
place.
‐ A Place-Bearing/Place-Bearing (PBX). The waypoint is defined by the interception of 2 radials
from 2 places.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 1(93)
