曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
The flight crew enters the name of the CO RTE into the [1L] field of the INIT A page. This action
enters all the elements of the flight plan. The database usually includes an alternate route
associated with the destination.
2. A company route, that is in the database, but the flight crew does not know it is there.
The flight crew enters a city pair in the [1R] field. The ROUTE SELECTION page automatically
appears and enables the flight crew to review all stored routes between the two cities before
selecting one of them.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-05 P 14/24
FCOM 19 AUG 10
3. There is no company route between the two cities.
The flight crew enters the city pair in the [1R] field. "NONE” automatically appears in the CO RTE
[1L] field, without automatically displaying the ROUTE SELECTION page.
The flight crew has to manually construct the entire flight plan.
For procedure, Refer to PRO-NOR-SRP-01-10-A FLIGHT PLAN INITIALIZATION - GENERAL.
FLIGHT PLAN CAPACITY
Applicable to:
In terms of flight plan capacity, the FMS takes into account 3 flight plans:
‐ The active flight plan
‐ The secondary flight plan
‐ The temporary flight plan.
Each flight plan can contain up to 200 legs. If a flight plan contains 200 legs, and if the flight crew
attempts to perform a lateral revision that increases the number of legs of this flight plan, the
FMS rejects the revision and the MCDU displays the “F-PLN FULL” message. For the active and
secondary flight plans, the primary parts must contain less than 135 legs, and the alternate parts
must contain lesgs than 65 legs.
FLIGHT PLAN CAPACITY
Applicable to:
,
,
MSN,,
4617,
In terms of flight plan capacity, the FMS takes into account 5 elements:
‐ The primary part of the active flight plan
‐ The alternate part of the active flight plan
‐ The primary part of the secondary flight plan
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-05 P 15/24
FCOM 19 AUG 10
‐ The alternate part of the secondary flight plan
‐ The temporary flight plan.
Each element can contain up to 200 legs. If an element contains 200 legs, and if the flight crew
attempts to perform a lateral revision that increases the number of legs of this element, the FMS
rejects the revision and the MCDU displays the “F-PLN FULL” message.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-05 P 16/24
FCOM 19 AUG 10
LATERAL REVISIONS
Applicable to:
The flight crew can revise the lateral flight plan following two types of revisions:
1. Lateral revisions that have an immediate effect on the active flight plan:
The flight crew inserts ‐ a new waypoint directly on the F-PLN page, deletes, or changes a
waypoint from it:
When the flight crew enters a new waypoint, which does not exist in the flight plan, the following
waypoint moves down the flight plan, with a discontinuity shown after the new waypoint.
‐ The flight crew adds a direct leg (DIR TO) from his present position to a selected waypoint:
The flight crew can change the “TO” waypoint of the active leg. The active leg then goes from
present position (T/P) to the waypoint selected or inserted as the new “TO” waypoint.
2. Lateral revisions that lead to a temporary flight plan (TMPY) before they take effect:
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
FLIGHT PLANNING - LATERAL FUNCTIONS
A318/A319/A320/A321 FLEET DSC-22_20-30-10-05 P 17/24
FCOM 19 AUG 10
The flight crew creates a temporary flight plan, then inserts it as a revision to the active flight plan.
The flight crew does this when selecting, deleting, or modifying several waypoints of an airway or
procedure at once (SID, STAR, HOLD, TAKEOFF or LANDING RWY). This modification is made
on specific “LAT REV” pages from the flight plan page.
Possible revisions are:
‐ Insert or modify the departure procedure
‐ Insert or modify the arrival procedure
‐ Insert a waypoint
‐ Change the destination
‐ Insert an airway
‐ Insert an offset
‐ Insert a holding pattern
‐ Select or enable an alternate flight plan.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 1(73)
