曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
to
Line 5
These lines display consecutive waypoints and associated fuel predictions, and
the forecast wind profile.
The direction of forecast winds is relative to true north.
Forecast winds include winds entered by the pilot (large font) and the
propagated winds at intermediate waypoints (small font).
If the flight crew uses a trip wind, it will be displayed for each waypoint. If no
other wind entry is made after takeoff, the FROM waypoint will display the
actually recorded wind, and the waypoints downpath will still display the trip
wind.
Line 6 DEST-UTC/DIST-EFOB Identical to F-PLN A page.
LATERAL REVISION PAGES
Applicable to:
These pages give the pilot a list of the lateral flight plan revisions, which can be used to change the
flight plan beyond a selected waypoint.
The pilot calls up these pages from the flight plan pages (A or B) by pressing the left key adjacent to
the selected waypoint.
Different lateral flight plan revisions are available for different waypoints.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 20/104
FCOM 19 AUG 10
TITLE The ident of the waypoint or airport selected for revision, along with its latitude and
longitude.
If the selected waypoint is the FROM waypoint, the title omits the aircraft latitude and
longitude, and displays the “PPOS” (present position) instead.
[ 1L ] DEPARTURE This prompt gives the pilot access to the departure pages, where he can select and
insert runways, SIDs, and TRANSs.
[ 2L ] OFFSET [ ] This prompt allows the pilot to enter a lateral offset, left or right, in the flight plan.
The offset may be between 1 and 50 nm.
When the pilot enters an offset, the OFFSET field becomes yellow and the 6L and 6R
fields display ERASE and INSERT. The pilot can delete an inserted offset either by
pressing the CLR pushbutton, by entering a zero for the amount of the offset, or by
selecting a DIR TO.
[ 3L ] HOLD This prompt gives access to the hold pages.
[ 4L ] ENABLE ALTN This prompt allows the pilot to switch to the alternate flight plan at the selected revision
waypoint, and use it as a new active flight plan.
The system never displays this prompt at the FROM waypoint.
[ 5L ] ALTN This prompt gives access to the alternate airport page. The system displays it only at the
destination.
[ 6L ] RETURN This prompt returns the display to the flight plan page.
To be continued on next page
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 21/104
FCOM 19 AUG 10
Continued from previous page
[ 1R ] ARRIVAL This prompt calls up the arrival pages, where RWY, APPR, STAR TRANS and VIA can
be selected and inserted.
[ 1R ] FIX INFO FIX INFO is only displayed on the lateral revision page at the origin or FROM waypoint. It
gives access to the FIX INFO page.
[ 2R ] LLXING/INCR/NO This prompt allows the pilot to create the latitude/longitude crossing point. The increment
(INCR) ranges from 1 to 20 °, and the number of crossing points from 1 to 99.
[ 3R ] NEXT WPT The pilot uses this prompt to enter the next waypoint. If this waypoint is a
latitude/longitude, or is neither in the database nor in the pilot-defined elements, the
display reverts to the NEWWAYPOINT PAGE.
[ 4R ] NEWDEST The pilot uses this prompt to enter a new destination.
[ 5R ] AIRWAYS The pilot uses this prompt to access the AIRWAYS page.
[ 6R ] INSERT This prompt is displayed when the pilot has created a temporary flight plan. It can be
used to activate the temporary flight plan.
TEMPORARY REVISION
When the pilot selects a lateral revision, the system creates a “Temporary F-PLN” and displays
it in yellow on the MCDU, and as a dashed yellow line on the ND, enabling the pilot to review the
data before inserting it. As long as the temporary flight plan is not inserted, the previous flight plan
remains active and the system guides the aircraft along it.
FIX INFO PAGE
Applicable to:
This page provides access to the RADIAL intercept function.
The reference may be one or more radial bearings, based on a given database fix or a pilot-defined
element.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-25 P 22/104
FCOM 19 AUG 10
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 1(135)
