曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
the route page.
[ 6L ] NEW ROUTE Pressing this key calls up the new route page.
[1R ] FROM/TO This identifies the city pair of the stored route.
[ 6R ] DELETE ALL Pressing this key changes the label "CONFIRM DELETE ALL"
which appears in amber. Pressing this key a second time deletes all
previously-stored routes.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 62/126
FCOM 19 AUG 10
NEW ROUTE PAGE
The pilot calls up this page by pressing the NEW ROUTE key on the PILOT'S ROUTE page.
It can be used to store up to five new routes that have already been defined in the active or
secondary flight plan.
[ 1L ] CO RTE This field allows the pilot to enter a new company route ident. If that
ident has already been assigned, the entry is rejected. The message
NON UNIQUE ROUTE is then displayed.
[ 2L ] STORE ACTIVE
F-PLN (cyan)
Pressing this key stores parameters of the active flight plan as a new
route.
This prompt appears when the system contains a FROM/TO, but only
during preflight.
[ 3L ] STORE SECONDARY
F-PLN (cyan)
Pressing this key stores parameters of the secondary flight plan as a
new route.
This prompt appears when the system contains a FROM/TO, and the
secondary flight plan has not yet been sequenced.
Note: If it has not already been named, a stored route ‐ is automatically named (SRTE 1 to
SRTE 5) when stored.
‐ When 5 routes are already stored, the pilot cannot insert a new stored route. The
“PILOTS' ROUTE FULL” message is displayed, and the pilot must manually delete a
route, in order to be able to store a new one.
‐ The following flight plan elements are not retained when the route is stored :
‐ Pilot-entered holds and constraints
‐ Offset
‐ Modifications to terminal procedures
‐ Pseudo waypoints
‐ Step at optimum
‐ The MCDU then displays “REVISIONS NOT STORED”.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 63/126
FCOM 19 AUG 10
AIRCRAFT STATUS PAGE
Applicable to:
,
,
MSN,,
4538,,
The pilot call this page up by pressing the DATA key on the MCDU console.
TITLE AIRCRAFT TYPE
[ 1L ] ENGINE TYPE The system uses this engine model to calculate predictions.
[ 2L ] ACTIVE DATABASE The validity period and part number are displayed in large font.
[ 3L ] SECOND DATABASE The validity period and part number are displayed in small font. The
pilot can press the 3L key to switch to the second database as the
active database.
CAUTION Cycling the database erases the primary and secondary flight plans, as well as the
stored data. The flight crew must never do this in flight.
[ 5L ] CHG CODE This field allows entry of a code which permits modification of the IDLE
and/or PERF factor displayed in 6L. It is displayed in the PREFLIGHT
and DONE phases. The label is displayed in small white fonts ; the
brackets, or the entered value, are displayed in large blue fonts.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 64/126
FCOM 19 AUG 10
[ 6L ] IDLE/PERF These factors can only be modified while the aircraft is on ground. If no
value has been entered, the default value, taken from the airline policy
file, is displayed in small font. Some aircraft require that the IDLE/PERF
factor to be adjusted.
The crew may use the following procedure :
Enter ARM into brackets ‐ in the CHG CODE line [5L].
‐ Write the new IDLE/PERF factor in the scratchpad.
‐ Enter this new factor in line [6L].
The entered factor is displayed in large green font. The airline may
change the ARM code.
[4R] STORED This field displays pilot-stored data in a large green font. The field is
blank, if no data is stored. (The airline can choose to have this data
automatically erased at the done phase).
[5R] DELETE ALL Pressing this key changes the label to "CONFIRM DELETE ALL" in
amber. Pressing this key a second time deletes all pilot-stored data,
except data that is part of the active and secondary flight plans.
[6R] STATUS/XLOAD This prompt gives access to the P/N STATUS and P/N XLOAD pages.
P/N XLOAD PAGE
Applicable to:
,
,
MSN,,
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 1(181)
