737-700 MAINTENANCE TRAINING MANUAL BITE HANDBOOK 机务培训手册 自测手册(63)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

CDS BITE PAGES - CDS BITE MAIN MENU 
General The CDS has maintenance information that you can see on the flight management systems multifunction control display unit  (MCDU).  To do a check of the identification and configuration information, select LSK 4L. To do a check of the input monitoring discrete status, select LSK 5L. 
To get access to the maintenance information, select CDS on line select key (LSK) 5L from the MAINT BITE INDEX. This shows the CDS BITE page. 
On the CDS BITE INDEX page, select either DEU 1 on LSK 1L or DEU 2 on LSK 2L. This shows the CDS MAINT/BITE main menu for the DEU 1 or DEU 2. 
CDS BITE Main Menu 
There are five maintenance procedures that you do through the CDS MAINT/BITE Main Menu. These are the procedures: 
-Check of the current status -Check of the inflight faults -Ground tests -Check of the identification and configuration information -Check of the input monitoring discrete status. 
To do a check of the current status, select LSK 1L. 
To do a check of the inflight faults, select LSK 2L. 
To operate a ground test, select LSK 3L. You can not operate a ground test if the engines are on because there is no carrot for LSK 3L. 

A31-62-00-802.fm
January 1, 2004
31-62
- 2 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL

MINT BITE INDEX 1/ 1
A <FMC ENGINES <DFCS APU <T FQIS
A/ <ADIRS <CDS <INDEX DE INDEX 1/ 1

CS BIT <DEU 1 <DEU 2
<INDEX

CSDEU
D 1MAINT/BITE MAIN MENU 1/ 1 <CURRENT STATUS <INFLIGHT FAULTS <GROUND TESTS <IDENT/CONFIG <INPUT MONITORING
DISCRETE STATUS <INDEX
A31-62-00-802.fm
CDS BITE PAGES -CDS BITE MAIN MENU
January 1, 2004
31-62
- 3 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
CDS BITE PAGES - CURRENT STATUS
General
To do a check of the current status, select CURRENT STATUS on line select key (LSK) 1L from the CDS MAIN MENU. This shows the CURRENT STATUS page.
Any active faults detected by the DEU shows.
CURRENT STATUS Page
A single fault shows on a page. The number of current status pages show on the top right. The number of pages is the number of current status faults. To show the next current status fault, select the NEXT PAGE key on the FMC MCDU keypad.
The faults show in the order that the DEU detects the faults. If the DEU detects a new fault while current faults show, the new fault page shows as the last page.
This information shows for a single fault:
-Maintenance message number
-Fault description
-Suspected LRUs.
The maintenance message number is a number assigned to this fault. You can use the maintenance message number index in the fault isolation manual (FIM) to find the correct fault isolation procedure to fix the fault.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-700 MAINTENANCE TRAINING MANUAL BITE HANDBOOK 机务培训手册 自测手册(63)