January 1, 2004
34-61
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
A34-61-00-065.fm
FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
General
The model/engine configuration page shows the airplane and engine configuration. It also shows the engine combustor type and the brake option selected. The engine ratings will show this data:
-Full rated takeoff thrust
-First takeoff derate thrust
-Second takeoff derate thrust
-Takeoff bump thrust rating (if selected).
If the takeoff derate (TO-1 or TO-2) or the takeoff bump rating do not exist for the selected engine/airframe configuration, NONE will be shown in that thrust data field.
To access this page select MODEL/ENG (LSK 1R) from the FMCS BITE page.
FMC MODEL/ENG Pages
When you power up, the FMC monitors the airframe/engine configuration program pins to make sure the configuration is valid. If there is a non-normal condition, one of these messages shows:
-Message PARITY ERROR shows if the airframe/engine
configuration program pins are not set to odd parity. It also shows
for an invalid SDI discrete configuration
-INVALID shows if the model/engine performance database is not
installed or the loaded MEDB has failed its validity check
-PROGRAM PIN NOT IN MODEL/ENGINE DATA BASE shows if
the airframe/engine configuration program pins do not match the
data in the model/engine performance database.
January 1, 2004
34-61
- 28 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
A34-61-00-065.fm
NORMAL DISPLAY
FMCS PROGRAM PIN PARITY THE MODEL/ENGINE PERFORMANCEFMCS PROGRAM PINS DO NOT MATCH IS NOT ODD PARITY DATABASE IS NOT INSTALLED THE MODEL/ENGINE PERFORMANCE DATABASE
FMCS BITE PAGES - AIRPLANE MODEL AND ENGINE CONFIGURATION
January 1, 2004
34-61
- 29 -
SOUTHWEST AIRLINES PROPRIETARY(c) All rights reserved
SOUTHWEST AIRLINES.
737-700 MAINTENANCE TRAINING MANUAL
FMCS BITE PAGES - SOFTWARE OPTIONS
General
To show the FMCS software options, select SW OPTIONS on line select key (LSK) 3R, from the FMCS BITE page.
Software Option Pages
The software option pages show the status of the options that are in the software options database. The graphics show pages with example options.
The navigation data base (NDB) size is 2048K words. The default size is 2.5 Mwords or 5.0 Mbytes.
The software option code is a 12 digit hexadecimal number. To find your option code add each column in the software code (start with the left column). For example, if you have these options, your code is -0000000882C2:
-Runway offset in feet - (000000000002)
-GPS with integrity - (0000000000C0)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-700 MAINTENANCE TRAINING MANUAL BITE HANDBOOK 机务培训手册 自测手册(16)
