*
Departure station identifiers
*
Destination station identifiers
*
First alternate station
*
Second alternate station
*
Flight plan time
*
Fuel on board
*
Boarded fuel
*
Payroll numbers (captain, F/O, and 3 observers).
These three buttons show at the bottom of the display:
*
SEND
*
RETURN
*
EXIT.
The flight crew can do a manual flight initialization. To do this, they complete the flight initialization pages and select SEND.
To request an auto-initialization, the flight crew enters or confirms the flight number and schedule date. The flight crew then selects SEND to transmit the flight initialization message. This causes the ground to update the flight initialization display.
EFFECTIVITY BEJ ALL 23-27-00
Page 46
D633W101-BEJ Sep 05/2002
DCMS -FDCF FLIGHT INITIALIZATION DISPLAY
EFFECTIVITY BEJ ALL 23-27-00
Page 47
D633W101-BEJ Jan 05/2002
DCMS -FDCF DELAY REPORTS SUB-MENU
General
The flight crew uses the DELAY REPORT sub-menu to tell the airline of a departure, takeoff, or enroute delay. You select it from the COMPANY menu. Three exclusive selectors show on the DELAY REPORT display. These are the displays you can select from the DELAY REPORT display:
*
DEPARTURE DELAY
*
TAKEOFF DELAY
*
ENROUTE DELAY.
These three buttons show at the bottom of the display.
*
SEND -sends the downlink message
*
RETURN -takes you back to the COMPANY menu
*
EXIT -takes you back to the MAIN menu.
DEPARTURE DELAY
The DEPARTURE DELAY display shows the estimated out time. It also shows these exclusive-selectors:
*
AIRPORT CONGESTION
*
MECHANICAL PROBLEM
*
LATE CREW ARRIVAL
*
LATE AIRCRAFT
*
OTHER
*
LATE/MISSING PASSENGER
*
LOADING
*
ATC HOLD
*
WEATHER.
TAKEOFF DELAY
The TAKEOFF DELAY display shows the estimated off time and these exclusive selectors:
*
AIRPORT CONGESTION
*
MECHANICAL PROBLEM
*
ATC HOLD
*
WEATHER
*
OTHER.
ENROUTE DELAY
The ENROUTE DELAY display shows the estimated on time and these exclusive selectors:
*
ATC HOLD
*
ATC RE-ROUTING
*
WEATHER / HEADWINDS
*
PERFORMANCE LIMITS
*
POOR FLIGHT LEVEL
*
OTHER.
EFFECTIVITY BEJ ALL 23-27-00
Page 48
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
DCMS -FDCF DELAY REPORTS SUB-MENU
EFFECTIVITY BEJ ALL 23-27-00
Page 49
D633W101-BEJ Jan 05/2002
DCMS -FDCF CREW REQUESTS SUB-MENU
General
When you select the crew requests box, the CREW REQUESTS sub-menu shows these display selections:
*
WEIGHT AND BALANCE
*
FLIGHT PLAN
*
Airline traffic information system (ATIS)
*
CLEARANCE
*
FLIGHT RELEASE
*
Notice to Airmen (NOTAMS)
*
RE-CLEARANCE
*
GATE ASSIGNMENT.
When you make a selection, the display shows information and entry fields.
Each display has buttons to downlink and uplink messages and information.
EFFECTIVITY BEJ ALL 23-27-00
Page 50
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
DCMS -FDCF CREW REQUESTS SUB-MENU
EFFECTIVITY BEJ ALL 23-27-00
Page 51
D633W101-BEJ Jan 05/2002
DCMS -FDCF MANAGER MENU
General
The MANAGER menu selection gives the flight crew access to these manager sub-menus:
*
ACARS
*
VHF
*
SATCOM
*
Automatic dependent surveillance (ADS)
*
System information
*
Printer
*
Automatic messages
*
Master.
EFFECTIVITY BEJ ALL 23-27-00
Page 52
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
DCMS -FDCF MANAGER MENU
EFFECTIVITY BEJ ALL 23-27-00
Page 53
D633W101-BEJ Jan 05/2002
DCMS -FDCF ACARS SUB-MENU
ACARS Sub-menu Page One
Page one of the ACARS sub-menu lets the flight crew select the ACARS frequency and scan rate. It also lets the flight crew set the secondary frequency. To do this, type the frequency into the CDU scratch pad. Use the cursor control device (CCD) to highlight the box prompts. Use the CCD cursor select switch to select the secondary frequency.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 通讯 Communications 1(36)
