C.
Prepare to Install the Stall Warning Computer
S 864-006
(1)
Make sure that these breakers on the P11 panel are open and DO-NOT-CLOSE tags are attached:
(a)
11B18, WARN ELEX B
(b)
11J33, WARN ELEX A
D.
Install the Stall Warning Module
S 864-018
CAUTION: DO NOT TOUCH THE STALL WARNING MODULE BEFORE YOU DO THE
_______ PROCEDURE FOR ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (AMM 20-41-01/201). ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE STALL WARNING MODULE.
(1)
Do the procedure for electrostatic discharge sensitive devices (AMM 20-41-01/201).
(2)
Close the WEU access door.
S 414-007
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-32-01
ALL ú ú 01 Page 403 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
E. Put the Airplane Back to Its Usual Condition
S 864-008
(1)
Supply electrical power (AMM 24-22-00/201).
S 864-009
(2)
Remove the DO-NOT-CLOSE tags and close these circuit breakers on the P11 panel:
(a)
11B18, WARN ELEX B
(b)
11J33, WARN ELEX A
S 714-012
(3)
Do the Stall Warning Computer Operational Test (AMM 27-32-00/501).
S 414-013
(4)
Close the access door 119BL (AMM 06-41-00/201).
S 864-014
(5)
Remove electrical power if it is not necessary (AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-32-01
ALL ú ú 03 Page 404 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
WARNING ELECTRONIC UNIT (WEU) BITE MODULE - REMOVAL/INSTALLATION
________________________________________________________________
1. General_______
A. This procedure has two tasks. These tasks remove and install the WEU BITE modules.
TASK 27-32-02-024-001
2. Remove WEU BITE Module (Fig. 401)______________________
A. References
(1)
AMM 06-41-00/201, Fuselage Access Doors and Panels
(2)
AMM 20-41-01/201, Electrostatic Discharge Sensitive Devices
(3)
AMM 24-22-00/201, Electrical Power - Control
(4)
AMM 27-32-00/501, Stall Warning System
B.
Access
(1)
Location Zones
119 Main Equipment Center (Left)
211/212 Control Cabin
(2)
Access Panel
119BL Main Equipment Center
C.
Prepare for Removal
S 014-002
(1)
Open the main equipment center access door, 119BL
(AMM 06-41-00/201).
S 864-003
(2)
Remove electrical power (AMM 24-22-00/201).
S 864-004
(3)
Open these circuit breakers on the overhead circuit breaker panel, P11, and attach DO-NOT-CLOSE tags:
(a)
11B18, WARN ELEX B
(b)
11J33, WARN ELEX A
S 864-019
CAUTION: DO NOT TOUCH THE STALL WARNING MODULE BEFORE YOU DO THE
_______ PROCEDURE FOR ELECTROSTATIC DISCHARGE SENSITIVE DEVICES (AMM 20-41-01/201). ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE STALL WARNING MODULE.
(4) Do the procedure for electrostatic discharge sensitive devices (AMM 20-41-01/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-32-02
ALL ú ú 04 Page 401 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 3(147)
