757
MAINTENANCE MANUAL
STOP FITTING
PUSHROD END
FLUSH
BMS 3-33
(2 LOCATIONS)
3
FWD
OPERATING MECHANISM (SHOWN WITH THE DOOR CLOSED)
6 POINTS
EXTERIOR HANDLE
D
PUSHROD INTERIOR HANDLE
PUSHROD
LATCHING MECHANISM 4 POINTS
3
CLOSE AND LATCH THE DOOR BEFORE
YOU GET ACCESS TO THE LUBRICATION
E
FITTINGS ON THE UPPER LOCK PUSHROD.
No. 1 and No. 2 Cargo Door Lubrication Figure 301 (Sheet 4)
STOP FITTING PUSHROD END FLUSH
BMS 3-33 (2 LOCATIONS)
TORQUE TUBE PUSHROD END FLUSH
BMS 3-33 (2 LOCATIONS)
PUSHROD END FLUSH
BMS 3-33 (4 LOCATIONS)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-22
ALL ú ú 01.1 Page 305 ú Sep 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
NO. 3 CARGO DOOR - SERVICING
____________________________
TASK 12-21-24-643-001
1. Lubricate the No. 3 Cargo Door
______________________________
A. Consumable Materials
(1) D00013 Grease, MIL-G-23827
B. Access
(1) Location Zone
823 No. 3 Cargo Door
C. Procedure - Lubricate the No. 3 Cargo Door
S 643-004
CAUTION: BE CAREFUL WHEN YOU DISENGAGE THE GREASE GUN FROM THE
_______ LUBRICATION FITTING. DAMAGE TO THE LUBRICATION FITTING CAN EASILY OCCUR.
(1) Lubricate the No. 3 cargo door as shown in Fig. 301.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH NO. 3 CARGO DOOR ú
12-21-24
ú ú 01 Page 301 ú Dec 20/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
NO. 3 CARGO DOOR SEE A
LATCH ROLLER
(ON DOOR FRAME) FWD INBD
SEE B
NO. 3 CARGO DOOR A
CUTOUT FRAME
LATCH ROLLER
(2 LOCATIONS)
LATCH ROLLER
1
FLUSH
LATCH ROLLER
MIL-G-23827
2 POINTS
(2 LOCATIONS)
B
1 ONE MORE LUBE POINT IS ON THE OPPOSITE SIDE (NOT SHOWN)
No. 3 Cargo Door Lubrication
Figure 301
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH NO. 3 CARGO DOOR ú
12-21-24
ú ú 01 Page 302 ú Dec 20/89
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
1.
2.
ú ú
3.
ú ú
757 MAINTENANCE MANUAL
EQUIPMENT COMPARTMENT AND EXTERIOR SERVICE DOORS - SERVICING
____________________________________________________________
General
_______
A. This procedure contains three tasks. The first task gives instructions to lubricate the air conditioning access door. The second task gives instructions to lubricate the forward access door. The third task gives instructions to lubricate the electrical/electronics access door.
TASK 12-21-27-643-001
Lubricate the Air Conditioning Access Door (Fig. 301)
__________________________________________
A. Consumable Materials
(1)
D00633 Grease - BMS 3-33 (Recommended)
(2)
D00013 Grease, MIL-G-23827 (Alternative)
B. Access
(1)
Location Zone
100 Lower Half of Fuselage
(2)
Access Panels
193HL/194ER Air Conditioning Access Door
C. Procedure - Lubricate the Air Conditioning Access Door
S 643-002
CAUTION: BE CAREFUL WHEN YOU DISENGAGE THE GREASE GUN FROM THE
_______ LUBRICATION FITTING. DAMAGE TO THE LUBRICATION FITTING CAN EASILY OCCUR.
(1) Lubricate the air conditioning access door as shown (Fig. 301).
TASK 12-21-27-643-003
Lubricate the Forward Access Door (Fig. 302)
_________________________________ 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 SERVICING 2(52)
