(b)
6D23, ALTN FLAP PWR
S 013-061
(12) Remove the applicable access panels that follow (Ref 06-44-00/201):
NOTE: It is possible that some of the lube points can be
____ reached through the access doors.
(a)
511DB/611DB Main and Auxiliary Track Roller Lubrication
(b)
511FB/611FB Main and Auxiliary Track Roller Lubrication
(c)
511HB/611HB Main and Auxiliary Track Roller Lubrication
S 013-281
(13) Lubricate the roller bearings, lubricate the rub surfaces on the main and auxiliary tracks, and lubricate the rub surfaces between the main track sector gears and the rotary actuator pinion gears for the left (right) inboard LE slats (Fig. 302)
NOTE: Lubricate roller bearings through bolts with lube
____ fittings only.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 01 Page 312 ú Sep 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
F. Put the Airplane Back to Its Usual Condition
S 413-063
(1) Install the access panels for the left (right) inboard LE slats that follow (Ref 06-44-00/201):
(a)
511DB/611DB Main and Auxiliary Track Roller Lubrication
(b)
511FB/611FB Main and Auxiliary Track Roller Lubrication
(c)
511HB/611HB Main and Auxiliary Track Roller Lubrication
S 843-066
(2)
Remove the PDU lock from the TE flap PDU (Fig. 307).
S 863-067
(3)
Remove the circuit breaker locks and the DO-NOT-CLOSE tags, and close these circuit breakers on the P11 panel:
(a)
11B18, WARN ELEX B
(b)
11D31, HYDRAULICS PTU CONT
(c)
11H23, FLAP/SLAT ALTN DR SHUTOFF ARM
(d)
11J33, WARN ELEX A
S 863-068
(4) Remove the circuit breaker locks and the DO-NOT-CLOSE tags, and close these circuit breakers on the P6 panel:
(a)
6D20, ALTN SLAT PWR
(b)
6D23, ALTN FLAP PWR
S 933-065
(5)
Remove the DO-NOT-OPERATE tag from the flap control lever.
S 843-064
(6)
Make sure the TE flaps and LE slats are fully retracted with the flap control lever in the zero (FLAPS UP) detent (AMM 27-81-00/201).
S 843-069
WARNING:_______USE AMM 32-00-15/201 TO REMOVE THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY AND CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
(7) Remove the door locks from the landing gear doors and close the doors (Ref 32-00-15/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 01 Page 313 ú May 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 863-070
(8)
Remove the electrical power if it is not necessary
(Ref 24-22-00/201).
S 843-071
(9)
Do the activation procedure for the thrust reverser
(Ref 78-31-00/201).
TASK 12-21-08-643-031
5. Lubricate the Slat Loss Sensing and Indication Cable Tube
_________________________________________________________
A. Equipment
(1)
Trailing Edge Flap Power Drive Unit Lock - B27008-1
(2)
Circuit Breaker Lockout Clip
(Commercially Available)
(3)
LE Slat Drive Lock Set - B27020-31
(includes CB Locks B27020-25 and B27065-1. Valve Locks B27020-32 or B27077-1 are not used in this procedure)
B. Consumable Materials
(1) D00121 Silicone Grease - Grease-DC-33
(Dow Corning)
C. References
(1)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 SERVICING 2(3)
