757
MAINTENANCE MANUAL
ELECTRIC MOTOR 1
1 HYDRAULIC MOTOR B
C
POSITION TRANSMITTER C
B
FWD
PDU FOR LEADING EDGE SLAT B
Leading Edge Slat Power Drive Unit Lubrication
Figure 304 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 02 Page 336 ú May 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
B-B
C-C
Leading Edge Slat Power Drive Unit Lubrication
Figure 304 (Sheet 3)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú
ú 03 Page 337
ú Mar 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
Leading Edge Slat Power Drive Unit Lubrication
Figure 304 (Sheet 4)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 03 Page 338 ú May 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
ANGLE GEARBOX A
SEE A
ANGLE
GEARBOX
DRAIN COVER
AFT END OF FWD
CARGO COMPARTMENT
NOTE: TORQUE TUBES NOT SHOWN.
A
ANGLE GEARBOX LEFT ANGLE GEARBOX SHOWN (RIGHT ANGLE GEARBOX OPPOSITE) TOP VIEW
A
DRIVE ANGLE GEARBOX
BEVEL GEAR 1 MIL-G-21164
(1 LOCATION)
1 3
DRAIN COVER 2
1 POINT
1 LUBRICATE THE INTERNAL GEAR BY THE STEP-BY-STEP PROCEDURE IN THIS SUBJECT.
A-A
GET TO THE LUBRICATION POINT THROUGH
THE DRAIN COVER
2 WHEN THE DRAIN COVER IS INSTALLED APPLY ONE COAT OF PRIMER AROUND THE EDGE (REF 51-21-10/701)
3 MIL-G-21164 RECOMMENDED MIL-G-23827 OPTIONAL
Leading Edge Slat Drive Angle Gearbox Lubrication Figure 305
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 01 Page 339 ú Mar 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
LEFT WING SHOWN
(RIGHT WING OPPOSITE)
Slat Loss Sensing and Indication Cable Tube Lubrication
Figure 306 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
12-21-08
ALL ú ú 02 Page 340 ú Mar 20/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
GUIDE TUBE FOR SLAT LOSS SENSOR
SWITCH
INBD
FWD
B
ON AIRPLANES WITHOUT THE LUBRICATION DO NOT DISASSEMBLE ANY MECHANISM.
FITTING IN THE CABLE TUBE: APPLY A LARGE QUANTITY OF GREASE
TO COAT ALL SURFACES TO KEEP
1. USE A GREASE GUN WITH A TAPERED TIP ADAPTER MOISTURE AT A MINIMUM
2. PUT THE TAPERED TIP OF THE GREASE GUN INTO ON AIRPLANES WITH THE LUBRICATION
EACH END OF CABLE TUBE. PUT AS MUCH NEW FITTING IN THE CABLE TUBE, ADD
GREASE INTO THE TUBE AS POSSIBLE GREASE UNTIL THE GREASE COMES OUT
BOTH ENDS OF THE CABLE TUBE
Slat Loss Sensing and Indication Cable Tube Lubrication
Figure 306 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址：757 AMM 飞机维护手册 SERVICING 2(12)
