R **ON A/C 106-149, 151-199, 201-299, 301-399, 401-499,
5. Close-up
________
Subtask 22-70-00-860-081
A. Put the aircraft back to its initial configuration.
Subtask 22-70-00-862-065
B. De-energize the aircraft electrical circuits (Ref. TASK 24-41-00-862-002).
INTENTIONALLY BLANK
R 1 1
22-70-00Page 314
1 1 Aug 01/05 1 1 1CES 1
R **ON A/C 062-099,
R TASK 22-70-00-610-006-B
R Download the FM Data
R 1. Reason for the Job__________________
R Download the FM DATA with the Portable Data Loader (PDL) or with a
R floppy-disk data loader (SUNDSTRAND/ALLIED SIGNAL or equivalent).
R 2. Job Set-up Information______________________
R A. Fixtures, Tools, Test and Support Equipment
R -------------------------------------------------------------------------------
R REFERENCE QTY DESIGNATION
R -------------------------------------------------------------------------------
R No specific circuit breaker(s) safety clip(s)
R PS4084544-103 1 FM BITE DOWNLOAD TOOL
R YV68A110 1 PORTABLE DATA LOADER
R B. Referenced Information
R -------------------------------------------------------------------------------
R REFERENCE DESIGNATION
R -------------------------------------------------------------------------------
R 24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
R External Power
R 24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
R from the External Power
R 3. Job Set-up__________
R Subtask 22-70-00-860-084
R A. Aircraft Maintenance Configuration
R (1) Energize the aircraft electrical circuits
R (Ref. TASK 24-41-00-861-002).
R (2) Make sure that the electronics rack ventilation is in operation.
R (3) Make sure that the aircraft is in the ground configuration.
R Subtask 22-70-00-865-097
R B. Make sure that this(these) circuit breaker(s) is(are) closed:
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 49VU AUTO FLT/FMGC/1 10CA1 B02 R 49VU AUTO FLT/MCDU/1 11CA1 B01 R 121VU AUTO FLT/FMGC/2 10CA2 M17 R 121VU AUTO FLT/MCDU/2 11CA2 N20
R Subtask 22-70-00-865-098
R C. Open, safety and tag this(these) circuit breaker(s):
R -------------------------------------------------------------------------------R PANEL DESIGNATION IDENT. LOCATION R -------------------------------------------------------------------------------R 121VU COM NAV/ACARS/MU 2RB L06
R 4. Procedure
_________
R Subtask 22-70-00-610-065
R A. Downloading of the FM BITE Data
R -------------------------------------------------------------------------------R ACTION RESULT R -------------------------------------------------------------------------------
R 1. On the center pedestal, on the
R MCDU1(2):
R - turn the BRT knob to adjust the
R brightness.
R 2. Open the circuit breakers 10CA1,
R 10CA2, 11CA1 and 11CA2.
R 3. On the PORTABLE DATA LOADER
R (YV68A110):
R - set the ON/OFF switch to OFF.
R - connect the connecting cable to
R the loader connector.
R 4. On the panel 52VU:
MCDU1 and 2 go blank.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
R - remove the FMS LOAD blanking
R plate.
R - connect the connecting cable to
R the SYST1 connector.
R 5. Close the circuit breaker 11CA1.
R 6. On the portable data loader:
R - set the ON/OFF switch to ON.
R 7. Close the circuit breaker 10CA1.
R
R
R
R 8. On the portable data loader:
R - put the FM BITE DOWNLOAD TOOL
R (PS4084544-103) into the disk
R drive.
R 9. On the portable data loader:
R - eject the floppy disk.
R - set the ON/OFF switch to OFF.
R 10. Open the circuit breakers 10CA1
R and 11CA1.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行2(73)
