8.
On the Data Loading Selector:
-
push the PREV or NEXT key until you get the indication of the FMGC2 that you can download,
-
push the SEL CTL key.
9.
Close the circuit breaker 10CA2.
10.
On the multipurpose disk drive unit:
-put the FM BITE DOWNLOAD TOOL (PS4084544-103) into the disk drive.
11. On the multipurpose disk drive unit:
-FMGC1 SELECTED indication is shown.
-the power-up test of the FMGC1 starts.
-at the end of this test, the triple click aural warning sounds.
On the multipurpose disk drive unit:
-the TRANS IN PROG indication is shown
-then, the WAIT RESPONSE indication isshown when the transfer is completed.
On the display of the Data LoadingSelector:
-FMGC2NOT SELECTED indication is shown,
-FMGC2 SELECTED indication is shown.
-the power-up test of the FMGC2 starts.
-at the end of this test, the triple click aural warning sounds.
-On the multipurpose disk drive unit:
-the TRANS IN PROG indication is shown
-then, the WAIT RESPONSE indication isshown when the transfer is completed.
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-eject the floppy disk.
12. On the Data Loading Selector:
-set the ON/OFF switch to OFF.
13. Open the circuit breaker 10CA2
(wait for more than 5 seconds).
14. Close the circuit breakers 10CA1 and 10CA2. R **ON A/C 106-149, 151-199, 211-299, 301-399, 401-499,
Post SB 22-1089 For A/C 151-199,211-212,
Subtask 22-70-00-610-062-B
A. Downloading of the FM BITE Data NOTE : Do not use the same floppy disk for the two FMGC downloading.
____
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Open the circuit breakers 10CA1 and 10CA2.
2.
On the overhead panel, on the Data Loading Selector:
-Set the ON/OFF switch to ON.
3. On the overhead panel, on the Data Loading Selector:
-Push the PREV or NEXT key until you get the indication of the FMGC1 that you can download,
On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
On the multipurpose disk drive unit:
-The < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-FMGC1NOT SELECTEDindication is shown,
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
- Push the SEL CTL key. - FMGC1 SELECTED
indication is shown.
On the MCDU, the DATA LOAD page is displayed.
4. On the multipurpose disk drive unit: On the multipurpose disk drive unit:
- Put the FM BITE DOWNLOAD TOOL - The WAIT RESPONSE indication is shown
(PS4087689-102) into the disk drive.
5. Close the circuit breaker 10CA1. - The power-up test of the FMGC1 starts.
- At the end of this test, the triple click aural warning sounds.
On the multipurpose disk drive unit: - The TRANSF IN PROG indication is
shown
- The BUS n :xxxxxxx indication is
shown.
NOTE : "n" is the number of the bus (1____ to 8) in transfer. "xxxxxxx" is the number of bytes (0 to xxxxxxx).
- Then, the WAIT RESPONSE indication is shown when the transfer is completed. On the MCDU, - The DATA LOAD page is shown with loading files indication - When the download is completed, the DOWNLOAD COMPLETE message is shown.
6. On the multipurpose disk drive unit:
- Eject the floppy disk.
7. Open the circuit breaker 10CA1.
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
8. On the Data Loading Selector: - Push the PREV or NEXT key until you get the indication of the FMGC2 that you can download, On the display of the Data LoadingSelector:- FMGC2NOT SELECTED indication is shown,
- Push the SEL CTL key. - FMGC2 SELECTED
indication is shown.
9. On the multipurpose disk drive unit: On the multipurpose disk drive unit:
- Put the FM BITE DOWNLOAD TOOL - The < < WAIT RESPONSE > > indication
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行2(71)
