A320飞机维护手册 AMM AUTO FLIGHT 自动飞行2(72)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 (PS4087689-102) into the disk drive. is shown
 10. Close the circuit breaker 10CA2.  - The power-up test of the FMGC2 starts.
 - At the end of this test, the triple click aural warning sounds.
 On the multipurpose disk drive unit: - The < < TRANS IN PROG > > indication
 is shown
 - The BUS n :xxxxxxx indication is
 shown.
 NOTE : "n" is the number of the bus (1____ to 8) in transfer. "xxxxxxx" is the number of bytes (0 to xxxxxxx).
 - Then, the < < WAIT RESPONSE > > indication is shown when the transfer
 is completed. On the MCDU, - The DATA LOAD page is shown with loading files indication - When the download is completed, the DOWNLOAD COMPLETE message is shown.
 11. On the multipurpose disk drive unit: 

 

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
-Eject the FMGC2 floppy disk.
 12. On the Data Loading Selector:
 -Set the ON/OFF switch to OFF.
 13.
 Open the circuit breaker 10CA2 (wait for more than 5 seconds).

 14.
 Close the circuit breakers 10CA1 and 10CA2. **ON A/C 151-199, 201-212,

 Post SB 31-1130 For A/C 201-203, Subtask 22-70-00-610-062-A
 A. Downloading of the FM BITE Data
 -------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
 Open the circuit breakers 10CA1 and 10CA2.

 2.
 On the overhead panel, on the Data Loading Selector:

-Set the ON/OFF switch to ON.
3. On the overhead panel, on the Data Loading Selector:
-
Push the PREV or NEXT key until you get the indication of the FMGC1 that you can download,

-
Push the SEL CTL key.

On the display of the Data LoadingSelector:
-DB/N: PUSH NEXT/PREV indication is shown.
 On the multipurpose disk drive unit:
 -The < < MDDU READY > > indication is shown.
On the display of the Data LoadingSelector:
-FMGC1NOT SELECTEDindication is shown,
-FMGC1 SELECTED

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
4.
 Close the circuit breaker 10CA1.

5.
 On the multipurpose disk drive unit:

 -Put the FM BITE DOWNLOAD TOOL (PS4084544-103) into the disk drive.
6. On the multipurpose disk drive unit:
 -Eject the floppy disk.
 7.
 Open the circuit breaker 10CA1.

 8.
 On the Data Loading Selector:

-
Push the PREV or NEXT key until you get the indication of the FMGC2 that you can download,

-
Push the SEL CTL key.

9. Close the circuit breaker 10CA2.
indication is shown.
-The power-up test of the FMGC1 starts.
 -At the end of this test, the triple click aural warning sounds.
On the multipurpose disk drive unit:
-
The TRANSF IN PROG indication isshown

-
The BUS n :xxxxxxx indication is shown.

 NOTE : "n" is the number of the bus (1
____ to 8) in transfer. "xxxxxxx" is the number of bytes (0 to xxxxxxx).
 -Then, the WAIT RESPONSE indication is shown when the transfer is completed.
On the display of the Data LoadingSelector:
-FMGC2NOT SELECTED indication is shown,
-FMGC2 SELECTED indication is shown.
-The power-up test of the FMGC2 starts.
 -At the end of this test, the triple click aural warning sounds.

 -------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
10. On the multipurpose disk drive unit:
 -Put the FM BITE DOWNLOAD TOOL (PS4084544-103) into the disk drive.
11. On the multipurpose disk drive unit:
 -Eject the floppy disk.
 12. On the Data Loading Selector:
 -Set the ON/OFF switch to OFF.
 13.
 Open the circuit breaker 10CA2 (wait for more than 5 seconds).

 14.
 Close the circuit breakers 10CA1 and 10CA2.

On the multipurpose disk drive unit:
-
The TRANS IN PROG indication is shown

-
The BUS n :xxxxxxx indication isshown.

 NOTE : "n" is the number of the bus (1
____ to 8) in transfer. "xxxxxxx" is the number of bytes (0 to xxxxxxx).
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM AUTO FLIGHT 自动飞行2(72)