曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
FS overlays, the HOG display transitions to controls and displays for both artillery (ARTY) and air
the respective ARTY or AIR Mission missions. These pages are automatically displayed
Summary Page. after sending a Call For Fire (CFF) message or can be
displayed using HOG functionality. The JVMF provides
up to four different mission pages: ARTY #1, ARTY #2,
5. MOD HEADER. Displays the MOD HEADER AIR #1, and AIR #2.
overlay. This display provides the capability
to modify the recipients l i s t , message
precedence, message classification, and 1. ARTY Mission Summary Pages
message acknowledge. The message header
contains three boxes located to the right of a. Artillery Mission Summary Page Without
the title block at the top of most HOG Control. The typical Artillery Mission Page
displays. These boxes are only displayed without the control function is shown in
after the SEND command is initiated and on Figure 4-114.
messages that have been received. The (1) L-1. − Selects which Mission Summary
leftmost box is the message’s precedence, page is displayed. Pressing L-1 toggles
the center box is the message’s classification, the display from ARTY #1 to ARTY #2
and the rightmost box is the message’s to AIR #1 to AIR #2 and back to ARTY
acknowledge type. #1. If any of the pages are not active,
the text INACTIVE is displayed to the
a. RECIPIENTS. Select this option to display right of the mission page number. The
the NET SELECT overlay. Refer to Message legend at L-1 consists of the following
Defaults Thread paragraph for a description text: ARTY #x SSSSSSS AAA where
of NET SELECT.
x = Mission number: 1 or 2.
b. PRECEDENCE. The precedence overlay SSSSSSS = Mission status: CFF SENT,
a l l o w s t h e o p e r a t o r t o change t h e CKFIRE, EOM SENT, SHIFT SENT, RFFE
message’s precedence: Immediate (I), SENT, RNDS CMP, SHOT, READY, MSN
Routine (R), Flash (F), or Priority (P). The CMPLT, SPLASH, ACCEPTED, FIRE SENT,
selected option is displayed in the header. or INACTIVE.
AAA = ACK. Indicates that a machine
NOTE acknowledgment to the message sent has
been received and the mission status was
To enter any classification other than one of the following: CFF SENT, CHKFIRE
Unclassified, the operator must have SENT, EOM SENT, SHIFT SENT, and RFFE
e n t e r e d a password w i t h appended SENT. Otherwise, this text string is blanked.
4-244
TM 1-1520-248-10
Figure 4-113. SEND Message Thread (Sheet 1 of 2)
4-245
TM 1-1520-248-10
Figure 4-113. SEND Message Thread (Sheet 2 of 2)
4-246
TM 1-1520-248-10
(5) CHECK FIRE (R-2). If the current
mission is active, the legend consists of
the text CHECK FIRE. If the mission is
not active, the legend is blank. Pressing
R-2 changes the legend to CHECK
TGT. If R-2 is not pressed a second
time within 3 seconds, the legend
returns to CHECK FIRE. If R-2 is
pressed within 3 seconds, a Checkfire
Message is sent and the legend
changes to CANCEL CHECK EOM.
Additionally, the message status at L-1
changes to CHKFIRE SENT. Pressing
R-2 when the legend i s CANCEL
CHECK EOM returns the legend to
CHECK FIRE, initiates a CANCEL
CHKFIRE EOM (End of MISSION)
message, and changes the status at L-1
to EOM SENT. Pressing R-1 causes this
legend to be blanked.
(6) R-3. When t h i s page i s i n i t i a l l y
displayed, the R-3 legend is blank and
has no function. When R-2 is pressed
and its legend is CHECK TGT, the R-3
legend consists of the text CHECK ALL.
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD COMM
300 330 N 030 060 E
VSD
W
SAF>H
=12
=03
< ARTY#1 OFF SENT
T OF:0S
CLR
MSN
CHECK
FIRE
SEND
A AGAIN
4600
ARM TAC 2X
PNT TRK MMS
FFE/AMC
077°6120M AB0099
HE/3V/2U (60T)
406075-1488-43
J2997
If R-3 is pressed within 3 seconds of
Figure 4-114. ARTY MSN Without Control pressing R-2, a Checkall Message is
(2) L-2. Contains four lines of text. sent and the R-3 legend changes to
CANCEL CHECK ADJUST. Additionally,
Line 1 − is displayed in the form ZZZ/LLL the status at L-1 changes to CHKFIRE
(ZZZ=method of fire and LLL=method of SENT and a Checkfire All command is
control). initiated. If R-3 is not pressed within 3
L i n e 2 − i s d i s p l a y e d i n t h e f o r m seconds of pressing R-2, the legend is
XXX°YYYYAANNNN (XXX=target azimuth in blanked and no action is initiated.
degrees, YYYY=target range in meters, Pressing R-3 when the legend i s
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(38)
