曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
VSD HSD MMS COMM
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD MMS COMM
PULL
MAN
PULL
BKUP
BRT
C
ONT
VSD HSD MMS COMM
RAPID
RAPID
RAPID SEND
VSD
TARGET STRENGTH ENTRY PAGE
DEST - ? XMT
STATIONARY
MOVING
SPOT REPORT: TARGET ACTIVITY SELECT PAGE
SPOT REPORT SUMMARY PAGE
10
25
50
UNK
100
200
500
#(1-9)-STR
TGT ACTIVITY SEL
DUG IN
00:00
RETURN SPOT 1/3
SPOT 3/3
OBS ACT-CONT
406530-47-10
J2997
Figure 4-100. Report Pages (Sheet 2 of 2) 2. ALT key Press. Enter altitude in meters or
enter N/G.
4-204
TM 1-1520-248-10
3. FUEL key Press and enter.
4. Paging select key (1/1) Press to return to
Status Index page (fig. 4-101).
4 - 1 9 5 . W E A P O N S S T A T U S A L L
SUBSCRIBERS.
To obtain subscriber weapons status, proceed as
follows:
1. IDM switch Press as required to display
IDM Index page.
2. STATUS key Press.
3. SUBS WPNS key Press. Review weapons
s t a t u s o f n e t s u b s c r i b e r s a s I D M
automatically sequences from the first
subscriber in NET 1 to the last subscriber in
NET 8.
4. Paging key Press to return to Status Index
page.
4-196. PRESENT POSITION STATUS ALL
SUBSCRIBERS.
To obtain present position information on all net
subscribers, proceed as follows:
1. IDM switch Press as required to display
IDM Index page.
2. STATUS key Press.
3. SUBS PPSN key Press.
NOTE
• Subscriber status will begin with the first
subscriber in NET 1 and display, in order,
through the last subscriber in NET 8 as
paging key is pressed.
• UTM key can be alternately pressed to
display UTM grid coordinates or range
and bearing of subscriber status being
displayed.
4. If desired, return to Status Index page by
pressing paging key once more after last
subscriber status is displayed.
Figure 4-101. Status Pages
4-205
TM 1-1520-248-10
4-197. WEAPONS/PRESENT POSITION IDM codes, and cancel checkfire message. The free
STATUS SINGLE SUBSCRIBER. text and preset messages contain the same
information. The free text/preset messages are
To obtain the status of a single subscriber, proceed as automatically addressed to the team subscriber
follows: identifier. The MAYDAY message is addressed to the
broadcast subscriber identifier, and contains the
1. IDM switch Press as required to display MAYDAY message and own present position. The
IDM Index page. Authentication Synchronization (AUTH) message is
addressed to the broadcast subscriber identified in the
2. STATUS key Press. Start pages with whom the automatic authentication is
to occur (normally TACFIRE). If, after transmission, an
3. SELECT key Press. NAK is returned, the tables are out of synchronization.
TACFIRE will still get the message and change tables
4. SUB− key Press. Enter desired subscriber to match the observers. TACFIRE will call back once
identifier using MFK. Present Position page synchronization has been accomplished.
will display.
5. Paging key Press to review weapons 4-200. FREE TEXT MESSAGE COMPOSITION
status. AND TRANSMISSION.
6. Weapons status paging key Press to return To compose and transmit a free text message, proceed
as follows:
to Status Index page.
1. IDM switch Press as required to display
4-198. SUBSCRIBER POSITION STATUS. IDM Index page.
1. IDM switch Press as required to display 2. MSGS/FTXT key Press.
IDM Index page.
3. DEST− key Enter subscriber identifier
2. STATUS key Press. using MFK.
3. POS UPDT key Press. NOTE
4. SUBS POSITION key Press and review. When FREE TEXT − TEST is used for
communication check, data is not required.
5. Repeat steps 1 through 3.
4. FREE TEXT key Press to scroll between
6. SUBS NET key Select appropriate NET. TEST and DATA as required.
7. Repeat steps 4 and 5 as desired. 5. Message Enter any message up to 36
characters long using MFK.
8. Summary page Review and select
destination. 6. SEND key Press to transmit message (fig.
4-102).
9. SEND key Press.
4-201. PRESET MESSAGE TRANSMISSION.
4-199. FREE TEXT/PRESET MESSAGE To transmit any of up to six preset messages entered
PAGES. during IDM initialization, proceed as follows:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(25)
